Available for all Peter Paul Series 20, 30, 50, and 70 OEM solenoid valves, manifolds represent an economical, reliable method for grouping solenoid valves in low profile, compact arrays in applications which range from beverage dispensing to medical equipment. With less piping and fewer fittings, the use of manifolds allows faster solenoid valve installation with significantly reduced potential for leakage and thread damage. Valve groups are frequently delivered assembled-to-manifold and fully factory tested for leak-free valve operation at specified pressures.
Where possible, valve mounting bases are used so that the manifolds may be simply and inexpensively drilled and tapped. On the other hand, creating custom cavities and seats in stainless steel manifold blocks is frequently a complex manufacturing solution to applications where valve/manifold height is a primary consideration.
Standard Peter Paul manifolds are offered with 2, 4, 6, and 8 stations, but virtually any linear or over/under manifold configuration can be specified. In addition, Peter Paul provides a line of modular, stainless steel or anodized aluminum stacking valve housings linked together with common tie rods. For horizontal or vertical mounting, these stacking valves simplify in-the-field solenoid valve addition or replacement, accommodating housings from any of the standard Peter Paul valve series.
The 50-year-old Peter Paul Electronics Co., through a worldwide distributor network, provides a broad range of standard and miniature solenoid valves; Explosion-Proof, High-Flow, and High Pressure models; complimentary manifolds and stacking valves in stainless, brass, or aluminum; solenoid valve operators for OEM use; and a vast array of body, housing, and coil options for standard and special applications. Most Peter Paul solenoid valves are UL recognized and CSA listed.
For further information, write:
Peter Paul Electronics Co., Inc.
480 John Downey Drive, P.O. Box 1180
New Britain, CT 06050-1180