Series 50 Model 53
3-Way Normally Closed Valve (exhaust to atmosphere)
Our original mini — engineered for space economy without sacrificing performance. Typical applications include medical, analytical instrumentation. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.
• Smaller than the Series 30 but larger than the Series 58 and 15 valves.
• Tough with options to use in hazardous location environments or low watt applications.
• High quality engineering.
- SPECIFICATIONS
- 2-D & 3-D CAD DRAWING
- FLOW CHART
- NOMENCLATURE
| MAX. OPER. PRESS. DIFF. |
ORIFICE SIZE | CV FACTOR | VALVE NUMBER GROMMET HOUSING |
CONDUIT HOUSING | |||||
| AC | DC | NC | NO | NC | NO | 1/8 NPT PORTS | 1/8 NPT PORTS | ||
 |
|||||||||
| 200 | 200 | 1/32 | 1/32 | .022 | .020 | 53GG8DGB | 53GG8DCB | ||
| 150 | 150 | 3/64 | 3/64 | .055 | .048 | 53HH8DGB | 53HH8DCB | ||
| 150 | 150 | 3/64 | 1/16 | .055 | .075 | 53HJ8DGB | 53HJ8DCB | ||
| 100 | 100 | 1/16 | 1/16 | .075 | .075 | 53JJ8DGB | 53JJ8DCB | ||
| 60 | 60 | 3/32 | 1/16 | .156 | .075 | 53KJ8DGB | 53KJ8DCB | ||
| 50 | 50 | 3/32 | 3/32 | .156 | .150 | 53KK8DGB | 53KK8DCB | ||
| 30 | 30 | 1/8 | 1/16 | .230 | .075 | 53NJ8DGB | 53NJ8DCB | ||
| 30 | 30 | 1/8 | 3/32 | .230 | .150 | 53NK8DGB | 53NK8DCB | ||
WHEN ORDERING VALVES OR REPAIR PACKS ADD VOLTAGE AND FREQUENCY TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (53JJ8DGB-120/60) REPAIR PACK (K53JJD-AC)
OPERATING CONDITIONS
Media: Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range: Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 5000 PSI
Leakage: Bubble tight for standard valves.
Vacuum: To 5 Microns*
ELECTRICAL CHARACTERISTICS
Coil Voltage: 6.0 to 575V AC 60 HZ. and 5.4 to 515V AC 50 HZ. — 3.0 to 300V DC
Nominal Power: AC — 6.0 Watts DC — 7.0 Watts
Coil Construction: Non-molded Class A, Molded and potted Class F. (Class H optional)
Typical Response Time on Air: 4 – 16 Milliseconds
Operating Speed: Up to 600 CPM
Duty Cycle: Continuous
MECHANICAL CHARACTERISTICS
Body: Stainless Steel (Std.), Brass (Opt.) or Aluminum (Opt.)
Internal Components: Stainless Steel
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Orifice Diameter: See table above.
Porting: See table above.
Housing: Grommet and 1/2″ NPT conduit – many options available.*
Listings: Most valves are UL and CSA listed.*
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: Grommet Valve: 0.38 lb Conduit Valve: 0.44 lb
Repair Packs: See table above.
Options: Alternate Port Locations, Metering, Alternate Elastomers, Low Wattage, Spade Terminal Coil and Explosion Proof
* Consult representative or factory for options and specifications.
Series 50 General Purpose Valves
| A | A1 | A2 | A3 | A4 | A5 | B | C | C1 | C2 | C3 | C4 | |
|
||||||||||||
| inches | 2.39 | 2.95 | 2.62 | 3.18 | 2.48 | 3.27 | .30 | 1.22 | 1.89 | 1.67 | 1.07 | 2.23 |
| mm | 60.7 | 74.9 | 66.6 | 80.8 | 63.0 | 83.1 | 7.6 | 31.0 | 47.9 | 42.4 | 27.1 | 56.7 |
| D | D1 | D2 | E | F | G | H | I | I1 | J | J1 | K | |
|
||||||||||||
| inches | 1.05 | 1.00 | 1.44 | .59 | .40 | #8-32 X .23 | 1/8 NPT | 1.50 | 1.64 | .61 | .54 | 2.21 |
| mm | 26.7 | 25.4 | 36.5 | 15.0 | 10.1 | 5.8 DP | 1/8 NPT | 38.1 | 41.7 | 15.5 | 13.7 | 56.1 |
