Series 20 Model H23
High Pressure
3-Way Normally Closed Valve (piped exhaust)
A complete line of valves with a great selection of options and exceptional proven performance. Using the heart of the highly successful model H22, Peter Paul Electronics has a dual operator valve that allows the same media control as a three way normally closed valve but at much higher pressure ratings than previously available. To function as a 3-way normally closed valve, operators must be alternately energized and de-energized. Pressure applied to the “IN” port must always be equal to or greater than the pressure in “CYL” port. Air and other non-corrosive gasses, water and oil.
• Made for higher pressure ratings.
• Precision stainless steel, free-floating plunger.
• Kel-F pin sealing element.
• Orifice guides the sealing pin for near perfect alignment.
• Simple construction…only three moving parts.
• Available in Operator form for use in custom installation.
- SPECIFICATIONS
- 2-D & 3-D CAD DRAWING
- FLOW CHART
- NOMENCLATURE
| GAS PRESSURE | VALVE NUMBER | ||||||||
| RATINGS | ORIFICE SIZE | CV FACTOR | GROMMET HOUSING | CONDUIT HOUSING | |||||
| AC | DC | 1/4 NPT PORTS | 1/4 NPT PORTS | ||||||
 |
|||||||||
| 3000 | 3000 | 1/32 | .022 | H23GG19DGV | H23GG19DCV | ||||
| 2500 | 1500 | 3/64 | .041 | H23HH19DGVG | H23HH19DCVG | ||||
| 1750 | 500 | 1/16 | .065 | H23JJ19DGVG | H23JJ19DCVG | ||||
| 650 | 100 | 3/32 | .100 | H23KK19DGVG | H23KK19DCVG | ||||
| LIQUID PRESSURE | VALVE NUMBER | ||||||||
| RATINGS | ORIFICE SIZE | CV FACTOR | GROMMET HOUSING | CONDUIT HOUSING | |||||
| AC | DC | 1/4 NPT PORTS | 1/4 NPT PORTS | ||||||
|
|||||||||
| 3000 | 3000 | 1/32 | .022 | H23GG19DGV | H23GG19DCV | ||||
| 1500 | 1500 | 3/64 | .041 | H23HH19DGVL | H23HH19DCVL | ||||
| 1000 | 500 | 1/16 | .065 | H23JJ19DGVL | H23JJ19DCVL | ||||
| 300 | 100 | 3/32 | .100 | H23KK19DGVL | H23KK19DCVL | ||||
WHEN ORDERING VALVES OR REPAIR PACKS ADD VOLTAGE AND FREQUENCY TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (H24MG7XGV-12/DC) REPAIR PACK (KH24MGX-DC)
OPERATING CONDITIONS
Media: Air and other non-corrosive gasses, water and oil.
Filtration: Down to 60 microns or less is recommended.
Valve Temperature Range: Standard Valves – 0°F (-18°C) to a maximum of 221°F (105°C) including coil heat rise, ambient and media temperatures. Other temperature ranges available on request — along with specific application parameter information specified.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 10000 PSI
Leakage: Bubbletight (with polymer sealing pins)
ELECTRICAL CHARACTERISTICS
Coil Voltage: 6 to 825V AC 60 HZ. and 5 to 720V AC 50 HZ.— 1.8 to 265V DC
Nominal Power: AC — 7.7 DC — 9.5 Watts (Per Operator)
Coil Construction: Non-molded Class A (Std.), Molded and Potted Class F or Class H (Opt.)
Typical Response Time on Air: 4 – 16 Milliseconds
Operating Speed: Up to 600 CPM with gas media
Duty Cycle: Continuous
MECHANICAL CHARACTERISTICS
Body: 300 Series Stainless Steel
Internal Components: Stainless Steel
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Sealing Pin: Kel-F (Std.), Delrin®, Teflon®, Nylon, PEEK, Radel®, Ultem®, 303 Stainless Steel (Opt.)
Orifice Diameter: See table above.
Porting: 1/4″ NPT
Housing: Grommet and 1/2″ NPT conduit – many options available.*
Mounting: Must be mounted within 30° of vertical.
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: 2.50 lbs
Repair Packs: See table above.
Options: Alternate Port Locations, Alternate Elastomers, Alternate Sealing Pin Materials, Spade Terminal Coil, and European Style DIN Coil*
* Consult representative or factory for options and specifications.
Series 20 High Pressure Valves
| A | A1 | A2 | A3 | A4 | A5 | B | C | C1 | C2 | C3 | C4 | |
|
||||||||||||
| inches | 2.75 | 3.48 | 2.92 | 3.65 | 3.22 | 3.95 | .34 | 1.67 | 2.39 | 2.15 | 1.65 | 2.63 |
| mm | 69.9 | 88.4 | 74.1 | 92.6 | 81.8 | 100.3 | 8.6 | 42.5 | 60.7 | 54.7 | 42.0 | 66.8 |
| D | D1 | D2 | E | F | G | H | I | I1 | J | J1 | K | |
|
||||||||||||
| inches | 1.69 | 1.61 | 1.88 | .88 | .88 | #10-32 X .31 | 1/8 OR 1/4 NPT | 1.88 | 2.13 | .92 | .85 | 2.52 |
| mm | 42.9 | 41.0 | 47.7 | 22.4 | 22.4 | 7.9 DP | 1/8 OR 1/4 NPT | 47.8 | 54.1 | 23.4 | 21.5 | 64.0 |
