Series 80 Model E828

Large Orifice, Internally Piloted
2-Way Normally Closed Valve

Peter Paul offers a line of large orifice solenoid valves to address process industry requirements for high flow rate or quick dump and fill capacity. These AC or DC powered valves are also suited for low pressure gas and liquid applications. Port sizes for pilot lift, two way normally closed versions range from 1/2” to 3” NPT, with pressure ratings from 3 to 200 PSI.

• Large orifice sizes for high flow applications.
• Body is made of brass forgings or 316 stainless steel.
• Operates on differential pressure — Internal Pilot.
• NPT threaded connections.
• Same coils and housings as our popular 20 Series.

828flow

  • SPECIFICATIONS
  • 2-D & 3-D CAD DRAWING
  • FLOW CHART
  • NOMENCLATURE

VALVE SPECIFICATIONS

MAX. OPER.
PRESS. DIFF.
MIN. OPER.
PRESS. DIFF.
ORIFICE SIZE CV FACTOR PIPE SIZE VALVE NUMBER
AC DC N.C. N.C.
200 200 3 1/2 4.0 1/2 NPT E828B12DCCM
200 200 3 3/4 5.8 3/4 NPT E828Y19DCCM
200 200 3 1 13.0 1 NPT E828D13DCCM
200 200 3 1 1/2 29.0 1 1/2 NPT E828E14DCCM
200 200 3 2 46.0 2 NPT E828F16DCCM
200 200 3 3 76.0 2 1/2 NPT E828W17DCCM
200 200 3 3 98.0 3 NPT E828W18DCCM

WHEN ORDERING VALVES OR REPAIR KITS ADD VOLTAGE AND FREQUENCY TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (E828B12DCCM 120/60) REPAIR PACK (2KE828B12DD-AC)

OPERATING CONDITIONS

Media: Air, water, and other fluids compatible with Buna seals. Hot water, steam, gasoline and many oils require special seal materials. Consult representative or factory.(Series 80 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range: Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Minimum Operating Pressure Differentials: 3 PSI
Leakage: Bubble tight

ELECTRICAL CHARACTERISTICS

Coil Voltage: 6 to 825V AC 60 HZ. and 5 to 720V AC 50 HZ. — 1.8 to 265V DC
Nominal Power: AC — 7.7 Watts DC — 9.5 Watts
Coil Construction: Molded Class F(Std.); Molded Class H and Potted Class F or Class H (Opt.)
Operating Speed: Up to 100 CPM
Duty Cycle: Continuous

MECHANICAL CHARACTERISTICS

Body: Brass (Std.) — Stainless Steel (Opt.)
Internal Components: Stainless Steel (Std.)
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Housing: 1/2" NPT conduit
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Repair Kits: See table above.
Options: Alternate Elastomers and Manual Override

* Consult representative or factory for options and specifications.

Series 80 Internal Pilot Valves


1-1/2" NPT PORTS
2WNC
EXPLOSION PROOF

1/2" NPT PORTS
2WNC
EXPLOSION PROOF

1" NPT PORTS
2WNC
EXPLOSION PROOF

2 1/2" NPT PORTS
2WNC
EXPLOSION PROOF

2" NPT PORTS
2WNC
EXPLOSION PROOF

3/4" NPT PORTS
2WNC
EXPLOSION PROOF

3" NPT PORTS
2WNC
EXPLOSION PROOF

Coming Soon