Series 50 EW Model EW56

Encapsulated Hazardous Location
3-Way Multi-Purpose Valve

A UL and CSA listed, low watt, miniature hazardous location valve with minimal space and energy requirements in volatile environments. Air and other fluids, compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials.

• Smallest hazardous location solenoid valve.
• Best ambient and high temperature ratings on the market.
• NEMA 4 rating is standard with encapsulated coil.
• High quality engineering.

56flow

  • SPECIFICATIONS
  • 2-D & 3-D CAD DRAWING
  • FLOW CHART
  • NOMENCLATURE

VALVE SPECIFICATIONS

MAX. OPER.
PRESS. DIFF.
ORIFICE SIZE CV FACTOR VALVE NUMBER
AC DC N.C. N.O. N.C. N.O.
125 100 1/32 1/32 .022 .020 EW56GG8XDCCP
100 40 3/64 3/64 .055 .048 EW56HH8XDCCP
65 20 1/16 1/16 .075 .075 EW56JJ8XDCCP
45 15 5/64 5/64 .134 .134 EW56VV8XDCCP
40 10 3/32 3/32 .150 .150 EW56KK8XDCCP

WHEN ORDERING VALVES OR REPAIR KITS ADD VOLTAGE AND FREQUENCY TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (EW56JJ8XDCCP-120/60) REPAIR KIT (KEW56JJ-AC)

OPERATING CONDITIONS

Media: Air, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range: Standard Valves – 0°F (-18°C) to 140°F (60°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 5000 PSI
Leakage: Bubble tight for standard valves.
Vacuum: To 5 Microns*

ELECTRICAL CHARACTERISTICS

Coil Voltage: 16 to 547V AC 60 HZ. and 14.5 to 490V AC 50 HZ. — 6 to 200V DC
Nominal Power: AC — 5.0 Watts DC — 5.0 Watts
Coil Construction: Encapsulated Class F Coil with third wire ground
Typical Response Time on Air: 4 - 16 Milliseconds
Operating Speed: Up to 600 CPM
Duty Cycle: Continuous

MECHANICAL CHARACTERISTICS

Body: Stainless Steel (Std.)
Internal Components: Stainless Steel
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Orifice Diameter: See table above.
Porting: 1/8" NPT (Std.)
Housing: Encapsulated with 1/2 NPT conduit
Listings: Valves are UL listed for Hazardous Locations — Class I, Div 1, Groups A, B, C, and D - Class II, Div 1, Groups E, F, and G; Div 2, Groups A, B, C, D, E, F, and G. "T" Rating as low as T4.
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: 0.60 lbs
Repair Kits: See table above.
Options: Alternate Port Locations, Metering, Alternate Elastomers and All Stainless Steel Construction*

* Consult representative or factory for options and specifications.

Series 50 EW Encapsulated Low Watt Valves


MODEL EW56
3-WAY MULTI-PURPOSE
EXPLOSION PROOF

MODEL EW56 10-32 PORTS
3-WAY MULTI-PURPOSE
EXPLOSION PROOF

MODEL EW56 BODY OPTION "E"
3-WAY MULTI-PURPOSE
EXPLOSION PROOF

MODEL EW56 BODY OPTION "O"
3-WAY MULTI-PURPOSE
EXPLOSION PROOF

MODEL EW56 BODY OPTION "R"
3-WAY MULTI-PURPOSE
EXPLOSION PROOF

MODEL EW56 METERED BODY
3-WAY MULTI-PURPOSE
EXPLOSION PROOF