Series 80 Model E827

Large Orifice, Direct Lift
2-Way Normally Closed Valve

Peter Paul offers a line of large orifice solenoid valves to address process industry requirements for high flow rate or quick dump and fill capacity. These AC or DC powered valves are also suited for low pressure gas and liquid applications. Port sizes for direct lift, two way normally closed versions range from 3/8” to 3/4” NPT, with pressure ratings from 0 to 100 PSI.

• Large orifice sizes for high flow applications.
• Body is made of brass forgings or 316 stainless steel.
• Operates at low pressure without any differential pressure across the diaphragm — Direct Lift.
• NPT threaded connections.
• Direct Lift model is available in Normally Closed Only.

827flow

  • SPECIFICATIONS
  • 2-D & 3-D CAD DRAWING
  • FLOW CHART
  • NOMENCLATURE

VALVE SPECIFICATIONS

MAX. OPER.
PRESS. DIFF.
MIN. OPER.
PRESS. DIFF.
ORIFICE SIZE CV FACTOR PIPE SIZE VALVE NUMBER
AC DC  N.C.   N.C.
100 40 0 1/2 4.0 3/8 NPT E827T20DCCM
100 40 0 1/2 4.0 1/2 NPT E827B12DCCM
100 30 0 3/4 5.0 3/4 NPT E827Y19DCCM

WHEN ORDERING VALVES OR REPAIR KITS ADD VOLTAGE AND FREQUENCY TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (E827B12DCCM 120/60) REPAIR KIT (2KE827B12-AC)

OPERATING CONDITIONS

Media: Air, water, and other fluids compatible with Buna seals. Hot water, steam, gasoline and many oils require special seal materials. Consult representative or factory. (Series 80 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range: Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Leakage: Bubble tight

ELECTRICAL CHARACTERISTICS

Coil Voltage: 6 to 825V AC 60 HZ. and 5 to 720V AC 50 HZ. — 1.8 to 265V DC
Nominal Power: AC — 7.3 Watts DC — 9.5 Watts
Coil Construction: Molded (Std.) and Potted Class F or Class H (Opt.)
Operating Speed: Up to 100 CPM
Duty Cycle: Continuous

MECHANICAL CHARACTERISTICS

Body: Brass (Std.), 316 Stainless Steel (Opt.)
Internal Components: Stainless Steel (Std.)
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Housing: 1/2" NPT conduit
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Repair Kits: See table above.
Options: Alternate Elastomers.

* Consult representative or factory for options and specifications.

Series 80 Internal Pilot Valves


1/2" NPT PORTS
2WNC DIRECT LIFT
EXPLOSION PROOF

3/4" NPT PORTS
2WNC DIRECT LIFT
EXPLOSION PROOF

3/8" NPT PORTS
2WNC DIRECT LIFT
EXPLOSION PROOF

Coming Soon