Series 80 827 Magnetic Latching

Series 80 Model 827 Magnetic Latching Valve

Large Orifice, Direct lift
2-Way Normally Closed Valve

Peter Paul offers a line of large orifice solenoid valves to address process industry requirements for high flow rate or quick dump and fill capacity. These DC powered valves are also suited for low pressure gas and liquid applications. Port sizes for direct lift, two way normally closed versions range from 3/8” to 3/4” NPT, with pressure ratings from 0 to 40 PSI.

• Large orifice sizes for high flow applications.
• Body is made of brass forgings or 316 stainless steel.
• Operates at low pressure without any differential pressure across the diaphragm — Direct Lift.
• NPT threaded connections.
• Direct Lift model is available in normally closed only.

827flow

  • SPECIFICATIONS
  • 2-D & 3-D CAD DRAWING
  • FLOW CHART
  • NOMENCLATURE

VALVE SPECIFICATIONS

MAX. OPER.
PRESS. DIFF.
MIN. OPER.
PRESS. DIFF.
ORIFICE SIZE CV FACTOR PIPE SIZE PART NUMBER
DC
DIN COIL LEADED COIL
40 0 1/2 4.0 3/8 NPT 827B12DELM 827B12DGLM
40 0 1/2 5.8 1/2 NPT 827Y19DELM 827Y19DGLM
30 0 3/4 13.0 3/4 NPT 827D13DELM 827D13DGLM

WHEN ORDERING VALVES OR REPAIR PACKS ADD VOLTAGE AND FREQUENCY (DC ONLY) TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (827B12DELM 12/DC) REPAIR PACK (K827BDL-DC)

OPERATING CONDITIONS

Media: Air, water, and other fluids compatible with Buna seals. Hot water, steam, gasoline and many oils require special seal materials. Consult representative or factory. (Series 80 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range: Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Leakage: Bubble tight

ELECTRICAL CHARACTERISTICS

Coil Voltage: 3.6 to 28V DC
Nominal Power: Watts DC — 10 Watts
Coil Construction: Molded
Operating Speed: Up to 100 CPM

MECHANICAL CHARACTERISTICS

Body: Brass (Std.), 316 Stainless Steel (Opt.)
Internal Components: Stainless Steel (Std.)
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Housing: Lead wires and DIN style connector, female DIN style mating connector No. 20-198 available.
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Repair Packs: See table above.
Options: Alternate Elastomers

* Consult representative or factory for options and specifications.

SERIES 80 MODEL 827 MAGNET LATCHING DIN COIL


MAGNET LATCHING DIN COIL
2WNC DIRECT LIFT
1/2" NPT PORTS

MAGNET LATCHING DIN COIL
2WNC DIRECT LIFT
3/4" NPT PORTS

MAGNET LATCHING DIN
2WNC DIRECT LIFT
3/8" NPT PORTS

SERIES 80 MODEL 827 MAGNET LATCHING COIL WITH LEADS


MAGNET LATCHING COIL WITH LEADS
2WNC DIRECT LIFT
1/2" NPT PORTS

MAGENT LATCHING COIL WITH LEADS
2WNC DIRECT LIFT
3/4" NPT PORTS

MAGNET LATCHING COIL WITH LEADS
2WNC DIRECT LIFT
3/8" NPT PORTS