New High Pressure, Economical Series 20 Valve

New Britain, CT Peter Paul now offers high pressure Series 20 Models H21 & H24 valves with a redesigned guide pin that provides high seal ability at lower cost. Standard operating pressures are to 2,000 psi (H21) and 1,000 psi (H24), in gas or liquid. Higher-pressure ratings are also available (consult factory). Special sealing in plastic, Delrin® or steel is available.

Model H21 is a 2-Way Normally Open valve with an orifice size of .6mm and a CV factor of 0.10. Burst pressure is to 5,000 psi. Standard operating temperature is from 0ûF (-18°C) to 104°F (40°C). Model H24 is a 3-Way Normally Open valve with an orifice size of .6mm 1/32" and a CV factor of 0.10 inlet; .024 exhaust. Standard operating temperature is from 0°F (-18°C) to 104°F (40°C). Coils in both valves are DC operated.

Peter Paul Electronics, established in 1947, provides through worldwide distribution a broad range of standard and miniature solenoid valves, explosion proof, high-flow and high pressure models - most UL and CSA listed; complementary manifolds and stacking bodies in stainless, brass or aluminum; solenoid valve operators for OEM use; and a vast array of body, housing and coil options for standard and special applications.

For further information, write:
Series 20 High Pressure Valves
Peter Paul Electronics Co., Inc.
480 John Downey Drive
P.O. Box 1180
New Britain, CT 06050-1180
Phone: 860 229-4884
Fax: 860 223-1734