Solid State Timer and DIN Connector Added to Large Orifice Peter Paul Solenoid Valves For The European Market

For applications such as draining condensation in compressed air systems, Peter Paul Electronics Co., Inc., New Britain, Connecticut, has added a solid state timer accessory to the Series 80 group of brass-body, 5/8" diameter orifice, solenoid operated, 2-way, normally closed diaphragm valves.

Series 80 brass solenoid operated diaphragm valves with internal pilot may now be specified with a solid state timer and DIN Connector for European applications.

The integrated timer with DIN connector and valve combination is used in Europe for many on/off cycle applications. In addition, the Series 20 stainless steel valve may also incorporate a DIN male connector for wiring into a European system.

In operation, the timer off-cycle is initiated with the application of power to the valve's input terminals. At the end of the pre-set off time, the solenoid is energized and the on-cycle begins. At the conclusion of the pre-set on time, power is removed from the solenoid and a new cycle begins; this cycling continues until the power is removed from the valve's input terminals.

The solid state timer provides 1-45 minute adjustable off time and 0.25 sec. to 25.0 sec. adjustable on time with push- button manual override and status lights to indicate power and operation. Pressures of 5-150 psi through 1/2 NPT portings; voltages of 120/60, 110/50, and 240 VAC; and 9.5 watts normal power consumption are standard.

Series 20 stainless steel valve is also available with European DIN connector.

The Series 80 valve with timer is 2-3/4" x 6" x 3-17/64" package in which the timer and coil may be rotated 3600 for installation convenience. The timer may also incorporate DIN male connector for wiring directly into a system.

The 50-year-old Peter Paul Electronics Co., through a worldwide distributor network, provides a broad range of standard and miniature solenoid valves; Explosion-Proof, High- Flow, and High Pressure models; complimentary manifolds and stacking valves in stainless, brass, or aluminum; solenoid valve operators for OEM use; and a vast array of body, housing, and coil options for standard and special applica- tions. Most Peter Paul solenoid valves are UL recognized and CSA listed.

For further information, write:
Timer With DIN Connector
Peter Paul Electronics Co., Inc.
480 John Downey Drive, P.O. Box 1180
New Britain, CT 06050-1180
Phone: 860-229-4884
Fax: 860-223-1734
E-mail: info@peterpaul.com