Series 15 Model 153
3-Way Normally Closed — Magnet Latching Valve
(exhaust to atmosphere)
The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas and liquid media at pressures from vacuum to 200 psi — depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.
• Small, lightweight and economical.
• Operating pressures from vacuum to 200 psi.
• Quality design and construction.
- 2-D & 3-D CAD DRAWING
- FLOW CHART
|ORIFICE SIZE||CV FACTOR||VALVE NUMBER|
|DC||N.C.||N.O.||N.C.||N.O.||LEADED COIL||DIN COIL|
WHEN ORDERING VALVES OR REPAIR PACKS ADD VOLTAGE AND FREQUENCY TO COMPLETE
VALVE NUMBER. EXAMPLES: VALVE (153JJ2DGLM-12/DC) REPAIR PACK (K153JDLM)
Media: Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 15 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range: Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials: See table above.
Burst Pressure: 5000 PSI
Leakage: Bubble tight for standard valves.
Vacuum: To 5 Microns*
Coil Voltage: 3.0 to 180V DC
Nominal Power: DC — 10.5 Watts
Coil Construction: Molded Class F. (155 C°)
Typical Response Time on Air: Approximately 30 millisecond pilse to energize and de-energize.
Operating Speed: Up to 600 CPM
Body: Anodized Aluminum (Std.)
Internal Components: Stainless Steel
Elastomers: Nitrile (Buna) (Std.). Many other elastomers available.*
Orifice Diameter: See table above.
Porting: 1/8" NPT (Std.)
Housing: Leadwires and DIN Style Connector.
Listings: Most valves are UL and CSA listed.*
Life Expectancy: Millions of cycles, depending on application, lubrication, etc.
Valve Weight: 0.27 lb to 0.30 lb depending on model and housing style.
Repair Packs: See table above.
Options: Round Brass or Stainless Steel Body, Stackable Construction and Alternate Elastomers.
* Consult representative or factory for options and specifications.
Series 15 General Purpose Valves
3-WNC EXHAUST TO ATMOSPHERE
MAGNETIC LATCHING DIN STYLE
3WNC EXHAUST TO ATMOSPHERE
MAGNETIC LATCHING COIL WITH LEADS