Series 80 Model E828

2-WAY NORMALLY CLOSED

PeterPaul offers a line of large orifice solenoid valves to address process industry requirements for high flow rate or quick dump and fill capacity. These AC or DC powered valves are also suited for gas and liquid applications. Port sizes for pilot lift, two way normally closed versions range from 1/2” to 1” NPT, with pressure ratings from 3 to 200 PSI.

Large orifice sizes for high flow applications.
Body is made of brass or 316 stainless steel.
Operates on differential pressure — Internal Pilot.
NPT threaded connections.
Same coils and housings as our popular 20 Series.

Tabs

Specifications

MAX. OPER. PRESS. DIFF.		MIN. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR	PIPE SIZE	MODEL	PART NUMBER	BODY MATERIAL
AC	DC

200	200	3	1/2	4.0	1/2 NPT	E828B12DCCM	OE22Z0026∆CCM	BRASS
200	200	3	1	9	3/4 NPT	E828D29DCCM	OE22Z0091∆CCM	STAINLESS STEEL
200	200	3	1	13.0	1 NPT	E828D23DCCM	OE22Z0018∆CCM	STAINLESS STEEL

Ordering Information:

Seal Material: Replace ∆ with desired code - L = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (E828B12DCCM 120/60) repair pack (2KE828B12DD AC)

No operator available

Operating Conditions:

Media:

Air, water, and other fluids compatible with Buna seals. (Series 80 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

200 PSI

Leakage:

Bubble tight.

Electrical Characteristics:

Coil Voltage:

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power:

AC — 7.7 Watts DC — 9.5 Watts

Coil Construction:

Molded Class F(Std.); Molded Class H and Potted Class F or Class H (Opt.)

Operating Speed:

Up to 100 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Brass — Stainless Steel. See Chart

Internal Components:

Stainless Steel. Copper – AC Only.

Elastomers:

Nitrile (Buna)

Orifice Diameter:

See table above.

Porting:

1/2", 3/4", 1" NPT conduit

Housing:

1/2" NPT conduit

Listings:

Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G.

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Repair Packs:

See table above.

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/