Series L58 Model L582

2-WAY NORMALLY CLOSED

Easily interfaced with circuit boards and miniaturized components. The versatility is for connecting electronic signals to pneumatic outputs. The small size is ideal for stand alone (with #10-32 ports) or multiple valves mounted on one manifold. Air and other common gases - filtration recommended - 30 microns or less.

May be used to "pilot" larger valves.
Ideal for micro electronic production equipment.
Great for medical and chemical analytical applications.
Can operate directly from most programmable controllers.
High quality engineering.

Tabs

Specifications

MAX. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR	VALVE NUMBER

DC
150	0.6 mm	.010	L582A19DGM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (L582A19DG 12/DC) repair pack (KL582A19 DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OL582ADG 12/DC)

Operating Conditions:

Media:

Air and other common gasses - filtration recommended - 30 microns or less.

Valve Temperature Range:

Standard Valves – 5°F (-15°C) to 122°F (50°C) ambient and media. Note Do not allow water to freeze when using plastic body.

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

1500 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12, 24/DC

Nominal Power:

DC — 0.9 Watts

Coil Construction:

Molded Class A with leadwires (Std.), Micro DIN (Opt.)

Typical Response Time on Air:

DC - 9 Milliseconds

Operating Speed:

Up to 600 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Polyester Plastic (Std.), Stainless Steel (Opt.)

Internal Components:

Stainless Steel

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

#10-32 and Manifold Mount

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

0.13 lbs

Repair Packs:

See table above.

Options:

Round Stainless Steel, Male Stud Mount, and Manifold Mount*

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/

Series L58 Model L58 Leads

2WNC MOLDED LEADS COIL
STUD MANIFOLD MOUNT
WITH STAINLESS STEEL BODY

2WNC MOLDED LEAD STYLE COIL
STAINLESS STEEL BODY WITH 10-32 PORTS

2WNC MOLDED COIL WITH LEADS
PLASTIC BODY WITH 10-32 PORTS

Flow Chart Tab

Flow chart Series 58

Nomenclature Tab

Nomenclature Chart (58 series)

* Consult representative or factory for options and specifications