Series 20 Model H24

3-WAY NORMALLY OPEN

Using the heart of the highly successful model H22, Peter Paul Electronics Co., Inc., has a valve that allows the same media control as a three way normally open valve but at much higher pressure ratings than previously available. Pressure applied to the "IN" port must always be equal to or greater than the pressure in "CYL" port. Air and other non-corrosive gases, water and oil.

Made for higher pressure ratings.
Precision stainless steel plunger.
Kel-F pin and elastomeric sealing elements.
Orifice guides the sealing pin for near perfect alignment.
Simple construction...only three moving parts.

Tabs

Specifications

MAX. OPER.
PRESS. DIFF.

ORIFICE SIZE

CV FACTOR

VALVE NUMBER
GROMMET HOUSING

CONDUIT HOUSING

INLET

EXH.

INLET

EXH.

1/8 NPT PORTS

1/4 NPT PORTS

1/8 NPT PORTS

1/4 NPT PORTS

1000*

0.6 mm

1/32

.010

.022

H24MG7XGM

H24MG9ZGM

H24MG7XCM

H24MG9ZCM

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (H24MG7XGM 120/60) repair pack (KH24MGX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH24MGDDGM 120/60)

Operating Conditions:

Media:

Air and other non-corrosive gases, water and oil.

Filtration:

Down to 60 microns or less is recommended.

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

10,000 PSI

Leakage:

Bubble tight.

Electrical Characteristics:

Coil Voltage:

6, 12, 24, 125/DC

Nominal Power:

DC — 9.5 Watts

Coil Construction: