Series 30 Model 36

3-WAY MULTI-PURPOSE

Complete range of valves particularly suitable when cost and size are major factors. The bodies are constructed of brass (stainless steel is optional). Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Brass body with stainless steel internal construction.
A smaller, cost effective alternative to the any industry standard.

Tabs

Specifications

MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	CONDUIT HOUSING

AC	DC	N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/8 NPT PORTS

300	300	1/32	1/32	.024	.024	36GG5XGM	36GG5XCM
150	150	3/64	3/64	.052	.052	36HH5XGM	36HH5XCM
75	75	1/16	1/16	.095	.095	36JJ5XGM	36JJ5XCM
50	30	3/32	3/32	.160	.160	36KK5XGM	36KK5XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. for examples: valve (36HH5XCV 120/60) repair pack (K36HHX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O36HH5DCV 120/60)

Operating Conditions:

Media:

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 30 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

5000 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power:

AC — 8.0 Watts DC — 8.0 Watts

Coil Construction:

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air:

4 - 16 Milliseconds

Operating Speed:

Up to 600 CPM

Duty Cycle:

Continuous

Mechanical Characteristics :

Body:

Brass (Std.) or Stainless Steel (Opt.)

Internal Components:

Stainless Steel. Copper – AC Only.

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

Standard 1/8" NPT (other ports available).*

Housing:

Grommet and 1/2" NPT conduit - many options available.*

Listings:

Most valves are UL and CSA listed.*

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

Grommet Valve: 0.75 lb Conduit Valve: 0.81 lb

Repair Packs:

See table above.

Options:

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil*

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/

Series 30 General Purpose Valves Conduit

MODEL 36
3W MULTI-PURPOSE
CONDUIT CONNECTION

Series 30 General Purpose Valves DIN

MODEL 36 1/8-27 NPT
3-WAY MULTI-PURPOSE
DIN STYLE COIL

Series 30 General Purpose Valves Grommet

MODEL 36
3W MULTI-PURPOSE
GROMMET WITH LEADS

Series 30 General Purpose Valves Grommet/Bracket Connection

Series 30 General Purpose Valves Conduit/Bracket Connection

Flow Chart Tab

Flow chart Series 20-30

Nomenclature Tab

Nomenclature Chart (non 58 series)

Nomenclature, all valve series except 58

* Consult representative or factory for options and specifications