Series MLV15 Model 152

2-WAY NORMALLY CLOSED

2-Way Normally Closed — Magnet Latching Valve The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas and liquid media at pressures from vacuum to 500 psi — depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.

Small, lightweight and economical.
Operating pressures from vacuum to 500 psi.
Quality design and construction.

Tabs

Specifications

VALVE SPECIFICATIONS

MAX. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR	VALVE NUMBER

DC			LEADED COIL	DIN COIL

500	1/32	.022	152G2DGLM	152G2DELM
250	3/64	.055	152H2DGLM	152H2DELM
160	1/16	.075	152J2DGLM	152J2DELM
100	3/32	.130	152K2DGLM	152K2DELM
50	1/8	.230	152N2DGLM	152N2DELM

Operating Conditions:

Media:

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 15 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

5000 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

12, 24/DC

Nominal Power:

DC — 10.5 Watts

Coil Construction:

Molded Class F. (155 C°)

Typical Response Time on Air:

Approximate 50 millisecond pulse to energize and de-energize.

Operating Speed:

Up to 600 CPM

Mechanical Characteristics :

Body:

Anodized Aluminum (Std.)

Internal Components:

Stainless Steel

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter:

See table above.

Porting:

1/8" NPT (Std.)

Life Expectancy:

Millions of cycles, depending on application, lubrication, etc.

Valve Weight:

0.27 lb to 0.30 lb depending on model and housing style.

Repair Packs:

See table above.

Options:

Round Brass or Stainless Steel Body, Stackable Construction and Alternate Elastomers.

Drawings

To view files Autodesk Viewer can be found here. https://viewer.autodesk.com/

Series 15 Magnet Latching Valves

2WNC MAGNETIC LATCHING DIN STYLE COIL

2WNC MAGNETIC LATCHING COIL WITH LEADS

Flow Chart Tab

Flow chart Series 15

Nomenclature Tab

Nomenclature Chart (non 58 series)

Nomenclature, all valve series except 58

* Consult representative or factory for options and specifications