Series MLV20 Model MLV 24

3-WAY NORMALLY OPEN

3-Way Normally Open Valve This type of valve is often used in remote areas where continuous power may not be available or with battery-powered portable equipment where power capacity is limited. It is also valuable in equipment where coil heating , due to continuous application of power, is undesirable. Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials.

Valve is magnetic latching.
Meets today's demand for economy of space.
Uses power only during latching and un-latching.
Great for medical and chemical analyzers.

Tabs

Specifications

VALVE SPECIFICATIONS

MAX. OPER.					VALVE NUMBER

PRESS. DIFF.	ORFICE SIZE		CV FACTOR		DIN COIL		LEADED COIL
DC	INLET	EXH.	INLET	EXH.	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400	1/32	1/32	.024	.024	24GG7XELM	24GG9ZELM	24GG7xGLM	24GG9ZGLM
150	3/64	1/16	.052	.095	24HJ7XELM	24HJ9ZELM	24HJ7XGLM	24HJ9ZGLM
100	1/16	1/16	.095	.095	24JJ7XELM	24JJ9ZELM	24JJ7XGLM	24JJ9ZGLM
100	1/16	3/32	.095	.156	24JK7XELM	24JK9ZELM	24JK7XGLM	24JK9ZGLM
100	1/16	1/8	.095	.214	24JN7XELM	24JN9ZELM	24JN7XGLM	24JN9ZGLM
75	3/32	1/8	.156	.214	24KN7XELM	24KN9ZELM	24KN7XGLM	24KN9ZGLM

Operating Conditions:

Media:

Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range:

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials:

See table above.

Burst Pressure:

5000 PSI

Leakage:

Bubble tight for standard valves.

Vacuum:

To 5 Microns*

Electrical Characteristics:

Coil Voltage:

6, 9, 12, 24/DC

Nominal Power:

DC — 10.0 Watts

Coil Construction:

Molded Class B with DIN 43650 Form A Connector (Std.), Leadwires (Opt.) For your convenience we have the female DIN style mating connector No. 20-198** available for an additional fee.*

Typical Response Time on Air:

Approximate 50 millisecond pulse to energize and de-energize.

Operating Speed:

Up to 600 CPM

Mechanical Characteristics :

Body:

Stainless Steel (Std.) or Brass (Opt.)

Internal Components:

Stainless Steel

Elastomers:

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter: