Series 15 Model 153 - Piped Exhaust

Submitted by morgan on
Series 15 Model 153 - Piped Exhaust
Peter Paul Series 15 Model 153 Piped Flow Diagram

The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas, and liquid media at pressures from vacuum to 200 psi, depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.

  • Small, lightweight, and economical.
  • Operating pressures from vacuum to 200 psi.
  • Quality design and construction.
MAX. OPER.
PRESS. DIFF.		ORIFICE SIZECV FACTORVALVE NUMBER
LEAD WIRE		VALVE NUMBER
DIN STYLE		VALVE NUMBER
CONDUIT HOUSING
ACDCINLETEXHINLETEXH
2002001/321/32.022.020153GG2XGM153GG2XEM153GG2XCM
1501503/643/64.055.048153HH2XGM153HH2XEM153HH2XCM
1501503/641/16.055.075153HJ2XGM153HJ2XEM153HJ2XCM
1001001/161/16.075.075153JJ2XGM153JJ2XEM153JJ2XCM
60603/321/16.130.075153KJ2XGM153KJ2XEM153KJ2XCM
50503/323/32.130.130153KK2XGM153KK2XEM153KK2XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (153JJ2XELM 12/DC) repair pack (K153JXLM DC)

Coil Voltage
12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
Nominal Power
AC — 8.5 Watts, DC — 10.5 Watts
Coil Construction
Molded Class F. (155°C)
Typical Response Time on Air
4 - 16 Milliseconds
Operating Speed
Up to 600 CPM
Duty Cycle
Continuous
Internal Components
Stainless Steel. Copper – AC Only.
Elastomers
Nitrile (Buna) (Std.). Many other elastomers available.*
Orifice Diameter
See table above.
Porting
1/8" NPT (Std.)
Life Expectancy
Millions of cycles, depending on application, lubrication, etc.
Valve Weight
0.27 lb to 0.30 lb depending on model and housing style
Repair Packs
See table above.
Options
Round Brass or Stainless Steel Body, Stackable Construction, Alternate Elastomers and Magnetic Latching Coil. Female DIN Style Connector Part Number 50-17029.*
Media
Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 15 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range
Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials
See table above.
Burst Pressure
5000 PSI
Leakage
Bubble tight for standard valves.
Vacuum
To 5 Microns*

Series 15 General Purpose Valves

Technical drawing — MODEL 153 3-WAY PIPED EXHAUST CONDUIT CONNECTION
MODEL 153 3-WAY PIPED EXHAUST CONDUIT CONNECTION
Technical drawing — MODEL 153 3-WAY PIPED EXHAUST DIN STYLE
MODEL 153 3-WAY PIPED EXHAUST DIN STYLE
Technical drawing — MODEL 153 3-WAY PIPED EXHAUST MOLDED WITH LEADS
MODEL 153 3-WAY PIPED EXHAUST MOLDED WITH LEADS
Technical drawing — MODEL 153 3WNC PIPED EXHAUST MAGNETIC LATCHING DIN STYLE
MODEL 153 3WNC PIPED EXHAUST MAGNETIC LATCHING DIN STYLE
Technical drawing — MODEL 153 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS
MODEL 153 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS
Anodized Aluminum (Std.)

Series 15 Operators Conduit

Technical drawing — MODEL O153 3-WAY PIPED EXHAUST CONDUIT CONNECTION
MODEL O153 3-WAY PIPED EXHAUST CONDUIT CONNECTION

Series 15 Operators DIN

Technical drawing — MODEL O153 3-WAY PIPED EXHAUST DIN STYLE
MODEL O153 3-WAY PIPED EXHAUST DIN STYLE

Series 15 Operators Molded Leads

Technical drawing — MODEL O153 3-WAY PIPED EXHAUST MOLDED WITH LEADS
MODEL O153 3-WAY PIPED EXHAUST MOLDED WITH LEADS

Series 30 Model 33 - Exhaust to Atmosphere

Submitted by morgan on
Series 30 Model 33 - Exhaust to Atmosphere valve
Series 30 Model 33 - Exhaust to Atmosphere flow diagram

Complete range of valves particularly suitable when cost and size are major factors. The bodies are constructed of brass; stainless steel is optional. Air, water, and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

  • Brass body with stainless steel internal construction.
  • A smaller, cost-effective alternative to any industry standard.
MAX. OPER.
PRESS. DIFF.		ORIFICE SIZECV FACTORVALVE NUMBER
GROMMET HOUSING		VALVE NUMBER
CONDUIT HOUSING
ACDCINLETEXHINLETEXH1/8 NPT PORTS1/8 NPT PORTS
3003001/321/32.024.02433GG5DGM33GG5DCM
1751753/641/16.052.09533HJ5DGM33HJ5DCM
1251251/161/16.095.09533JJ5DGM33JJ5DCM
75753/323/32.160.16033KK5DGM33KK5DCM
50501/83/32.275.16033NK5DGM33NK5DCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (33JJ5DCM 120/60) repair pack (K33JJD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O33JJDDCM 120/60)

Coil Voltage
12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.
Nominal Power
AC — 8.0 Watts DC — 8.0 Watts
Coil Construction
Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)
Typical Response Time on Air
4 - 16 Milliseconds
Operating Speed
Up to 600 CPM
Duty Cycle
Continuous
Internal Components
Stainless Steel. Copper – AC Only.
Elastomers
Nitrile (Buna) (Std.). Many other elastomers available.*
Orifice Diameter
See table above.
Porting
Standard 1/8" NPT (other ports available).*
Housing
Grommet and 1/2" NPT conduit - many options available.*
Listings
Most valves are UL and CSA listed.*
Life Expectancy
Millions of cycles, depending on application, lubrication, etc.
Valve Weight
Grommet Valve: 0.75 lb Conduit Valve: 0.81 lb
Repair Packs
See table above.
Options
Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil
Media
Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 30 pressure ratings may change due to the viscosity of the liquid.)*
Valve Temperature Range
Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*
Maximum Operating Pressure Differentials
See table above.
Burst Pressure
5000 PSI
Leakage
Bubble tight for standard valves.
Vacuum
To 5 Microns*

Series 30 General Purpose Valves Conduit

Technical drawing — MODEL 33 1/8-27 NPT PORTS 3WNC EXHAUST TO ATMOSPHERE CONDUIT CONNECTION
MODEL 33
1/8-27 NPT PORTS 3WNC EXHAUST TO ATMOSPHERE CONDUIT CONNECTION
 

Series 30 General Purpose Valves DIN

Technical drawing — MODEL 33 1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE DIN STYLE COIL
MODEL 33
1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE DIN STYLE COIL
 

Series 30 General Purpose Valves Grommet

Technical drawing — MODEL 33 1/8-27 NPT PORTS 3WNC EXHAUST TO ATMOSPHERE GROMMET WITH LEADS
MODEL 33
1/8-27 NPT PORTS 3WNC EXHAUST TO ATMOSPHERE GROMMET WITH LEADS
 

Series 30 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 33 1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE GROMMET/BRACKET WITH LEADS
MODEL 33
1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE GROMMET/BRACKET WITH LEADS
Minimum quantity required. Please contact sales for additional assistance.
sales@peterpaul.com
 

Series 30 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 33 1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE CONDUIT/BRACKET CONNECTION
MODEL 33
1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE CONDUIT/BRACKET CONNECTION
Minimum quantity required. Please contact sales for additional assistance.
sales@peterpaul.com
 
Brass (Std.) or Stainless Steel (Opt.)

Series OE20

SERIES OE20
SERIES-OE20-OPERATOR_0.pdf
Explosion-proof solenoid operators for 2-Way and 3-Way OEM application PeterPaul's unique, unitized design offers the advantages of simplicity of installation (the unit is assembled and tested, requiring no disassembly) common voltages and frequencies carry the U.L. and C.S.A. label. Approved for hazardous locations, Class I - Groups C and D (where atmosphere contains certain specific explosive gases). Class II - Group E (where atmosphere contains metallic dust), F (where atmosphere contains non-metallic combustible dust), and Group G (where atmosphere contains grain dust).
Series OE20 solenoid operator dimension drawings

Series OE50

SERIES OE50
SERIES-OE50-OPERATOR.pdf
For 2-Way and 3-Way OEM applications, PeterPaul's unique, unitized design offers the advantages of simplicity of installation (the unit is assembled and tested, requiring no disassembly) for common voltages and frequencies and carries the U.L. and C.S.A. label. Approved for hazardous locations, Class I - Groups C and D (atmosphere contains certain specific explosive gases). Class II - Group E (where atmosphere contains metallic dust), and Group G (where atmosphere contains grain dust).
Series OE50 solenoid operator dimension drawings
Subscribe to
We will be closed

PeterPaul will be closed Monday, October 12th. We will re-open Tuesday, October 13th for regular business hours.  Please feel free to email us using the chat box below.