| PeterPaul

Puerto Rico ISO 9001 – Peter Paul Electric Inc.

Read more about Puerto Rico ISO 9001 – Peter Paul Electric Inc.

Certification Thumbnail

Puerto Rico ISO 9001 – Peter Paul Electric Inc.

Certification PDF

1026PR 26-27.pdf

Certification Category

ISO

ISO 9001 Certification from a Hybrid Quality System Approach

Peter Paul Electronics Co., Inc. is proud to announce ISO 9001 certification. PeterPaul started formally implementing ISO 9001 Certification in 2005. Over a 5-1/2 year span, the company’s operating processes were documented and modified where necessary, to not only comply with ISO 9001 certification requirements, but to establish a robust Quality Management System (QMS).

Read more about ISO 9001 Certification from a Hybrid Quality System Approach
Log in to post comments

Series 80 Model 829B

Read more about Series 80 Model 829B

Super valves that have ratings that formerly required valves of much greater size. They are higher flow at low pressures and have quick media fill or dump for air, inert gases, water and light oils for 10CST or less.

Large orifice.
Direct
Operates from 0 to 200psi.
NPT threaded connections.
Same coils and housings as our popular 70 Series.

Valve specifications — Series 80 Model 829B
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING

200	200	1/2	3.50	829B11DGM	829B11DCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (829B11DGM 120/60) repair pack (K829BD AC)

No operator available

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Molded and Potted Class F or Class H (Opt.)

Operating Speed

Up to 100 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel Anodized Aluminum.

Elastomers

Buna (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/2″ NPT

Housing

Grommet and 1/2" NPT conduit — many options available.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

2.20 lbs.

Repair Packs

See table above.

Options

Alternate Elastomers, valves for oil and water available.*

Media

Air, inert gases and liquids compatible with materials of construction.

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

1000 PSI

Leakage

Bubble tight for standard valves.

Nomenclature Chart (non 58 series)

Series 80 Valves Conduit

Technical drawing — MODEL 829B 1/2-14 NPT 2WNC CONDUIT CONNECTION — MODEL 829B
1/2-14 NPT 2WNC CONDUIT CONNECTION

Series 80 Valves Grommet

Technical drawing — MODEL 829B 1/2-14 NPT 2WNC GROMMET HOUSING WITH LEADS — MODEL 829B
1/2-14 NPT 2WNC GROMMET HOUSING WITH LEADS

Anodized Aluminum

Series 20 Model 21

Read more about Series 20 Model 21

A complete line of valves with a great selection of options and exceptional proven performance. The standard in the field. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

The flagship valve initially created for the fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model 21
+ MAX. OPER. PRESS. DIFF.				ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING		VALVE NUMBER CONDUIT HOUSING
AC		DC		ORIFICE SIZE	CV FACTOR	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400	(700)*	400	(700)*	1/32	.024	21G7XGM	21G9ZGM	21G7XCM	21G9ZCM
235	(500)	235	(500)	3/64	.053	21H7XGM	21H9ZGM	21H7XCM	21H9ZCM
150	(350)	150	(350)	1/16	.095	21J7XGM	21J9ZGM	21J7XCM	21J9ZCM
100	(150)	100	(150)	3/32	.156	21K7XGM	21K9ZGM	21K7XCM	21K9ZCM
35	(40)	35	(40)	1/8	.201	21N7XGM ^	21N9ZGM ^	21N7XCM ^	21N9ZCM ^

^ VALVES WITH 1/8 N.O. ORIFICE ARE UL LISTED ONLY
* FKM seals not recommended for pressure ratings above 500 PSI.
+ Ratings in brackets are optional extended ratings; consult factory

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (21J9ZGM 120/60) repair pack (K21JDX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O21JDZGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.7 Watts DC — 9.5 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" and 1/4" NPT (other ports available)*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 1.13 lb Conduit Valve: 1.19 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil, European Style DIN, Explosion Proof and Magnetic Latching Coil, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 20 General Purpose Valves Conduit

Technical drawing — MODEL 21 1/4-18 NPT 2WNO CONDUIT CONNECTION — MODEL 21
1/4-18 NPT 2WNO CONDUIT CONNECTION

Technical drawing — MODEL 21 1/8-27 NPT 2WNO CONDUIT CONNECTION — MODEL 21
1/8-27 NPT 2WNO CONDUIT CONNECTION

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO CONDUIT CONNECTION — MODEL 21
MANUAL OVERRIDE 2WNO CONDUIT CONNECTION

Series 20 General Purpose Valves DIN

Technical drawing — MODEL 21 1/4-18 NPT 2WNO DIN STYLE COIL — MODEL 21
1/4-18 NPT 2WNO DIN STYLE COIL

Technical drawing — MODEL 21 1/8-27 NPT 2WNO DIN STYLE COIL — MODEL 21
1/8-27 NPT 2WNO DIN STYLE COIL

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO DIN STYLE COIL — MODEL 21
MANUAL OVERRIDE 2WNO DIN STYLE COIL

Series 20 General Purpose Valves Grommet

Technical drawing — MODEL 21 1/4-18 NPT 2WNO GROMMET WITH LEADS — MODEL 21
1/4-18 NPT 2WNO GROMMET WITH LEADS

Technical drawing — MODEL 21 1/8-27 NPT 2WNO GROMMET WITH LEADS — MODEL 21
1/8-27 NPT 2WNO GROMMET WITH LEADS

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO GROMMET HOUSING WITH LEADS — MODEL 21
MANUAL OVERRIDE 2WNO GROMMET HOUSING WITH LEADS

Series 20 General Purpose Valves Yoke Leads

Technical drawing — MODEL 21 1/4-18 NPT 2WNO MOLDED COIL WITH YOKE — MODEL 21
1/4-18 NPT 2WNO MOLDED COIL WITH YOKE

Technical drawing — MODEL 21 1/8-27 NPT 2WNO MOLDED COIL WITH YOKE — MODEL 21
1/8-27 NPT 2WNO MOLDED COIL WITH YOKE

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO MOLDED COIL WITH LEADS — MODEL 21
MANUAL OVERRIDE 2WNO MOLDED COIL WITH LEADS

Series 20 General Purpose Valves Yoke Spades

Technical drawing — MODEL 21 1/4-18 NPT 2WNO YOKE WITH SPADE TERMINALS — MODEL 21
1/4-18 NPT 2WNO YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 21 1/8-27 NPT 2WNO YOKE WITH SPADE TERMINALS — MODEL 21
1/8-27 NPT 2WNO YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO YOKE WITH SPADE TERMINALS — MODEL 21
MANUAL OVERRIDE 2WNO YOKE WITH SPADE TERMINALS

Series 20 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 21 1/4-18 NPT 2WNO CONDUIT/BRACKET CONNECTION — MODEL 21
1/4-18 NPT 2WNO CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 21 1/8-27 NPT 2WNO CONDUIT/BRACKET CONNECTION — MODEL 21
1/8-27 NPT 2WNO CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO CONDUIT/BRACKET CONNECTION — MODEL 21
MANUAL OVERRIDE 2WNO CONDUIT/BRACKET CONNECTION

Series 20 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 21 1/4-18 NPT 2WNO GROMMET/BRACKET WITH LEADS — MODEL 21
1/4-18 NPT 2WNO GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 21 1/8-27 NPT 2WNO GROMMET/BRACKET WITH LEADS — MODEL 21
1/8-27 NPT 2WNO GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 21 MANUAL OVERRIDE 2WNO GROMMET/BRACKET HOUSING WITH LEADS — MODEL 21
MANUAL OVERRIDE 2WNO GROMMET/BRACKET HOUSING WITH LEADS

Stainless Steel (Std.) or Brass (Opt.)

Series 20 Operators Conduit

Technical drawing — MODEL O21 1/8-27 NPT 2WNO CONDUIT CONNECTION — MODEL O21
1/8-27 NPT 2WNO CONDUIT CONNECTION

Technical drawing — MODEL O21 1/4-18 NPT 2WNO CONDUIT CONNECTION — MODEL O21
1/4-18 NPT 2WNO CONDUIT CONNECTION

Series 20 Operators DIN

Technical drawing — MODEL O21 1/8-27 NPT 2WNO DIN STYLE COIL — MODEL O21
1/8-27 NPT 2WNO DIN STYLE COIL

Technical drawing — MODEL O21 1/4-18 NPT 2WNO DIN STYLE COIL — MODEL O21
1/4-18 NPT 2WNO DIN STYLE COIL

Series 20 Operators Explosion Proof

Technical drawing — MODEL O21 1/8-27 NPT 2WNO EXPLOSION PROOF — MODEL O21
1/8-27 NPT 2WNO EXPLOSION PROOF

Technical drawing — MODEL O21 1/4-18 NPT 2WNO EXPLOSION PROOF — MODEL O21
1/4-18 NPT 2WNO EXPLOSION PROOF

Series 20 Operators Grommet

Technical drawing — MODEL O21 1/8-27 NPT 2WNO GROMMET WITH LEADS — MODEL O21
1/8-27 NPT 2WNO GROMMET WITH LEADS

Technical drawing — MODEL O21 1/4-18 NPT 2WNO GROMMET WITH LEADS — MODEL O21
1/4-18 NPT 2WNO GROMMET WITH LEADS

Series 20 Operators Yoke Leads

Technical drawing — MODEL O21 1/8-27 NPT 2WNO MOLDED COIL WITH YOKE — MODEL O21
1/8-27 NPT 2WNO MOLDED COIL WITH YOKE

Technical drawing — MODEL O21 1/4-18 NPT 2WNO MOLDED COIL WITH YOKE — MODEL O21
1/4-18 NPT 2WNO MOLDED COIL WITH YOKE

Series 20 Operators Yoke Spades

Technical drawing — MODEL O21 1/8-27 NPT 2WNO YOKE WITH SPADE TERMINALS — MODEL O21
1/8-27 NPT 2WNO YOKE WITH SPADE TERMINALS

Technical drawing — MODEL O21 1/4-18 NPT 2WNO YOKE WITH SPADE TERMINALS — MODEL O21
1/4-18 NPT 2WNO YOKE WITH SPADE TERMINALS

Series 20 Operators Conduit/Bracket Connection

Technical drawing — MODEL O21 2WNO CONDUIT/BRACKET CONNECTION — MODEL O21 2WNO CONDUIT/BRACKET CONNECTION

Series 20 Operators Grommet/Bracket Connection

Technical drawing — MODEL O21 2WNO GROMMET/BRACKET HOUSING WITH LEADS — MODEL O21 2WNO GROMMET/BRACKET HOUSING WITH LEADS

Series 20 Model BP21 (Body Ported)

Read more about Series 20 Model BP21 (Body Ported)

Series 20 Model BP21 (Body Ported) flow diagram

A complete line of valves with a great selection of options and exceptional proven performance. The standard in the field. For use with air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

2-Way Normally Open with all ports in body.
Heavy duty and made of stainless steel.
Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model BP21 (Body Ported)
MAX. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING		VALVE NUMBER CONDUIT HOUSING
DC	ORIFICE SIZE	CV FACTOR	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

1750*	1/32	.024	BP21G7DGM	BP21G9DGM	BP21G7DCM	BP21G9DCM
650*	3/64	.053	BP21H7DGM	BP21H9DGM	BP21H7DCM	BP21H9DCM
350	1/16	.095	BP21J7DGM	BP21J9DGM	BP21J7DCM	BP21J9DCM
200	3/32	.156	BP21K7DGM	BP21K9DGM	BP21K7DCM	BP21K9DCM
100	1/8	.201	BP21N7DGM	BP21N9DGM	BP21N7DCM	BP21N9DCM

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (BP21K9DGM 120/60) repair pack (KBP21KDD DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OBP21KDDGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 7.7 Watts DC — 9.5 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.

Orifice Diameter

See table above.

Porting

See table above.

Housing

Grommet and 1/2" NPT conduit

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 1.13 lb, Conduit Valve: 1.19 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 20 General Purpose Valves Conduit

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS CONDUIT CONNECTION — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS CONDUIT CONNECTION

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS CONDUIT CONNECTION — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS CONDUIT CONNECTION

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS CONDUIT CONNECTION — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS CONDUIT CONNECTION

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS CONDUIT CONNECTION — MODEL BP21
METERING 2WNO BODY PORTS CONDUIT CONNECTION

Series 20 General Purpose Valves DIN

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS DIN STYLE COIL — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS DIN STYLE COIL

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS DIN STYLE COIL — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS DIN STYLE COIL

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS DIN STYLE COIL — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS DIN STYLE COIL

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS DIN STYLE COIL — MODEL BP21
METERING 2WNO BODY PORTS DIN STYLE COIL

Series 20 General Purpose Valves Grommet

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS GROMMET WITH LEADS — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS GROMMET WITH LEADS

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS GROMMET WITH LEADS — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS GROMMET WITH LEADS

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS GROMMET HOUSING WITH LEADS — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS GROMMET HOUSING WITH LEADS

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS GROMMET HOUSING WITH LEADS — MODEL BP21
METERING 2WNO BODY PORTS GROMMET HOUSING WITH LEADS

Series 20 General Purpose Valves Yoke Leads

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS YOKE WITH LEADS — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS YOKE WITH LEADS

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS YOKE WITH LEADS — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS YOKE WITH LEADS

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS YOKE WITH LEADS — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS YOKE WITH LEADS

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS YOKE WITH LEADS — MODEL BP21
METERING 2WNO BODY PORTS YOKE WITH LEADS

Series 20 General Purpose Valves Yoke Spades

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS YOKE WITH SPADE TERMINALS — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS YOKE WITH SPADE TERMINALS

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS YOKE WITH SPADE TERMINALS — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS YOKE WITH SPADE TERMINALS

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS YOKE WITH SPADE TERMINALS — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS YOKE WITH SPADE TERMINALS

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS YOKE WITH SPADE TERMINALS — MODEL BP21
METERING 2WNO BODY PORTS YOKE WITH SPADE TERMINALS

Series 20 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION — MODEL BP21
METERING 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION

Series 20 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL BP21 1/4-18 NPT 2WNO BODY PORTS GROMMET/BRACKET WITH LEADS — MODEL BP21
1/4-18 NPT 2WNO BODY PORTS GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL BP21 1/8-27 NPT 2WNO BODY PORTS GROMMET/BRACKET WITH LEADS — MODEL BP21
1/8-27 NPT 2WNO BODY PORTS GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL BP21 MANUAL OVERRIDE 2WNO BODY PORTS GROMMET/BRACKET HOUSING WITH LEADS — MODEL BP21
MANUAL OVERRIDE 2WNO BODY PORTS GROMMET/BRACKET HOUSING WITH LEADS

Technical drawing — MODEL BP21 METERING 2WNO BODY PORTS GROMMET/BRACKET HOUSING WITH LEADS — MODEL BP21
METERING 2WNO BODY PORTS GROMMET/BRACKET HOUSING WITH LEADS

Stainless Steel (Std.), Aluminum or Brass (Opt.)

Series 20 Operators Conduit

Technical drawing — MODEL OBPO21 2WNO BODY PORTS CONDUIT CONNECTION — MODEL OBPO21 2WNO BODY PORTS CONDUIT CONNECTION

Series 20 Operators Conduit/Bracket Connection

Technical drawing — MODEL OBPO21 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION — MODEL OBPO21 2WNO BODY PORTS CONDUIT/BRACKET CONNECTION

Series 20 Operators DIN

Technical drawing — MODEL OBPO21 2WNO BODY PORTS DIN STYLE COIL — MODEL OBPO21 2WNO BODY PORTS DIN STYLE COIL

Series 20 Operators Grommet

Technical drawing — MODEL OBPO21 2WNO BODY PORTS GROMMET HOUSING WITH LEADS — MODEL OBPO21 2WNO BODY PORTS GROMMET HOUSING WITH LEADS

Series 20 Operators Grommet/Bracket Connection

Technical drawing — MODEL OBPO21 2WNO BODY PORTS GROMMET/BRACKET HOUSING WITH LEADS — MODEL OBPO21 2WNO BODY PORTS GROMMET/BRACKET HOUSING WITH LEADS

Series 20 Operators Yoke Leads

Technical drawing — MODEL OBPO21 2WNO BODY PORTS MOLDED COIL WITH YOKE — MODEL OBPO21 2WNO BODY PORTS MOLDED COIL WITH YOKE

Series 20 Operators Yoke Spades

Technical drawing — MODEL OBPO21 2WNO BODY PORTS YOKE WITH SPADE TERMINALS — MODEL OBPO21 2WNO BODY PORTS YOKE WITH SPADE TERMINALS

Series 58 Model 584

Read more about Series 58 Model 584

Easily interfaced with circuit boards and miniaturized components. The versatility is for connecting electronic signals to pneumatic outputs. The small size is ideal for stand alone (with #10-32 UNF-2B ports) or multiple valves mounted on one manifold. Air and other common gases — filtration recommended — 30 microns or less.

May be used to "pilot" larger valves.
Ideal for micro electronic production equipment.
Great for medical and chemical analytical applications.
Can operate directly from most programmable controllers.
High quality engineering.

Valve specifications — Series 58 Model 584
MAX. OPER. PRESS. DIFF.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER
DC	INLET	EXH	INLET	EXH	LEADWIRE

145	0.6 mm	0.6 mm	.010	.010	584AA19PGM
100	0.8 mm	0.8 mm	.020	.020	584FF19PGM
50	1.0 mm	1.0 mm	.030	.030	584MM19PGM
40	1.2 mm	1.2 mm	.034	.034	584WW19PGM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (584MM19PGM 12/DC) repair pack (K584MM19D DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O584MMDPGM 12/DC)

Coil Voltage

12, 24/DC

Nominal Power

DC — 3.5 Watts

Coil Construction

Molded Class A with leadwires

Typical Response Time on Air

AC — 3 to 9 Milliseconds, DC — 9 Milliseconds

Operating Speed

Up to 1000 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

#10-32 UNF-2B

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.13 lbs

Repair Packs

See table above.

Options

Round Stainless Steel, Male Stud Mount, and Manifold Mount*

Media

Air and other common gases — filtration recommended — 30 microns or less.

Valve Temperature Range

Standard Valves – 5°F (-15°C) to 122°F (50°C) ambient; media.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

1500 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (58 series)

Series 58 Model 584 Molded Leads

Technical drawing — MODEL 584 3WNO MOLDED COIL WITH LEADS PLASTIC BODY WITH 10-32 PORTS — MODEL 584 3WNO MOLDED COIL WITH LEADS PLASTIC BODY WITH 10-32 PORTS

Technical drawing — MODEL 584 3WNO PIPED EXHAUST MOLDED LEAD STYLE COIL STAINLESS STEEL BODY WITH 10-32 PORTS — MODEL 584 3WNO PIPED EXHAUST MOLDED LEAD STYLE COIL STAINLESS STEEL BODY WITH 10-32 PORTS

Technical drawing — MODEL 584 3WNO PIPED EXHAUST MOLDED LEADS STYLE COIL MANIFOLD MOUNT PLASTIC BODY WITH MANUAL OVERRIDE — MODEL 584 3WNO PIPED EXHAUST MOLDED LEADS STYLE COIL MANIFOLD MOUNT PLASTIC BODY WITH MANUAL OVERRIDE

Technical drawing — MODEL 584 3WNO PIPED EXHAUST MOLDED LEADS COIL MANIFOLD MOUNT PLASTIC BODY — MODEL 584 3WNO PIPED EXHAUST MOLDED LEADS COIL MANIFOLD MOUNT PLASTIC BODY

Technical drawing — MODEL 584 3WNO PIPED EXHAUST MOLDED LEADS COIL STUD MANIFOLD MOUNT WITH STAINLESS STEEL BODY — MODEL 584 3WNO PIPED EXHAUST MOLDED LEADS COIL STUD MANIFOLD MOUNT WITH STAINLESS STEEL BODY

Polyester Plastic (Std.), Stainless Steel (Opt.)

Series 58 Operators Molded Leads

Technical drawing — MODEL O584 3WNO MOLDED COIL WITH LEADS — MODEL O584 3WNO MOLDED COIL WITH LEADS

Series 15 Model 154

Read more about Series 15 Model 154

The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas and liquid media at pressures from vacuum to 150 psi — depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.

Small, lightweight and economical.
Operating pressures from vacuum to 150 psi.
Quality design and construction.

Valve specifications — Series 15 Model 154
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING
AC	DC	INLET	EXH	INLET	EXH	VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING

150	150	1/32	1/32	.020	.022	154GG2XGM	154GG2XEM	154GG2XCM
125	125	3/64	3/64	.048	.055	154HH2XGM	154HH2XEM	154HH2XCM
100	100	1/16	1/16	.075	.075	154JJ2XGM	154JJ2XEM	154JJ2XCM
75	75	1/16	3/32	.075	.130	154JK2XGM	154JK2XEM	154JK2XCM
50	50	3/32	3/32	.130	.130	154KK2XGM	154KK2XEM	154KK2XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (154JJ2XGM 120/60) repair pack (K154JX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O154JJDXGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 7.0 Watts, DC — 10.5 Watts

Coil Construction

Molded Class F. (155°C)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Leadwires, 1/2” NPT Conduit and DIN Style Connector.

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.27 lb to 0.30 lb depending on model and housing style.

Repair Packs

See table above.

Options

Round Brass or Stainless Steel Body, Stackable Construction, Alternate Elastomers and Magnetic Latching Coil. Female DIN Style Connector Part Number 50-17029.*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 15 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 15 General Purpose Valves

Technical drawing — MODEL 154 3WNO CONDUIT CONNECTION — MODEL 154 3WNO CONDUIT CONNECTION

Technical drawing — MODEL 154 3WNO DIN STYLE — MODEL 154 3WNO DIN STYLE

Technical drawing — MODEL 154 3WNO MOLDED WITH LEADS — MODEL 154 3WNO MOLDED WITH LEADS

Anodized Aluminum (Std.)

Series 15 Operators Conduit

Technical drawing — MODEL O154 3WNO CONDUIT CONNECTION — MODEL O154 3WNO CONDUIT CONNECTION

Series 15 Operators DIN

Technical drawing — MODEL O154 3WNO DIN STYLE — MODEL O154 3WNO DIN STYLE

Series 15 Operators Molded Leads

Technical drawing — MODEL O154 3WNO MOLDED WITH LEADS — MODEL O154 3WNO MOLDED WITH LEADS

Series 30 Model 34

Read more about Series 30 Model 34

Complete range of valves particularly suitable when cost and size are major factors. The bodies are constructed of brass (stainless steel is optional). Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Brass body with stainless steel internal construction.
A smaller, cost effective alternative to any industry standard.

Valve specifications — Series 30 Model 34
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	INLET	EXH	INLET	EXH	1/8 NPT PORTS	1/8 NPT PORTS

300	300	1/32	1/32	.024	.024	34GG5XGM	34GG5XCM
175	175	3/64	1/16	.052	.095	34HJ5XGM	34HJ5XCM
100	100	1/16	3/32	.095	.160	34JK5XGM	34JK5XCM
60	60	3/32	1/8	.160	.275	34KN5XGM	34KN5XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (34HJ5XCM 120/60) repair pack (K34HJX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O34HJDXCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.0 Watts DC — 8.0 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 0.75 lb Conduit Valve: 0.81 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 30 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 30 General Purpose Valves Conduit

Technical drawing — MODEL 34 1/8-27 NPT 3WNO CONDUIT CONNECTION — MODEL 34
1/8-27 NPT 3WNO CONDUIT CONNECTION

Series 30 General Purpose Valves DIN

Technical drawing — MODEL 34 1/8-27 NPT 3WNO DIN STYLE COIL — MODEL 34
1/8-27 NPT 3WNO DIN STYLE COIL

Series 30 General Purpose Valves Grommet

Technical drawing — MODEL 34 1/8-27 NPT 3WNO GROMMET WITH LEADS — MODEL 34
1/8-27 NPT 3WNO GROMMET WITH LEADS

Series 30 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 34 1/8-27 NPT 3WNO GROMMET/BRACKET WITH LEADS — MODEL 34
1/8-27 NPT 3WNO GROMMET/BRACKET WITH LEADS

Series 30 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 34 1/8-27 NPT 3WNO CONDUIT/BRACKET CONNECTION — MODEL 34
1/8-27 NPT 3WNO CONDUIT/BRACKET CONNECTION

Brass (Std.) or Stainless Steel (Opt.)

Series 20 Model 24

Read more about Series 20 Model 24

The flagship valve initially created for the fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model 24
+ MAX. OPER. PRESS. DIFF.			ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING		VALVE NUMBER CONDUIT HOUSING
AC		DC	INLET	EXH	INLET	EXH	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400		400	1/32	1/32	.024	.024	24GG7XGM	24GG9ZGM	24GG7XCM	24GG9ZCM
150	(225)	150	3/64	1/16	.052	.095	24HJ7XGM	24HJ9ZGM	24HJ7XCM	24HJ9ZCM
100	(150)	100	1/16	1/16	.095	.095	24JJ7XGM	24JJ9ZGM	24JJ7XCM	24JJ9ZCM
100	(150)	100	1/16	3/32	.095	.156	24JK7XGM	24JK9ZGM	24JK7XCM	24JK9ZCM
100	(125)	100	1/16	1/8	.095	.284	24JN7XGM^	24JN9ZGM^	24JN7XCM^	24JN9ZCM^
75	(90)	75	3/32	1/8	.156	.284	24KN7XGM^	24KN9ZGM^	24KN7XCM^	24KN9ZCM^
30		30	1/8	1/8	.201	.284	24NN7XGM^	24NN9ZGM^	24NN7XCM^	24NN9ZCM^

^ VALVES WITH 1/8 N.O. ORIFICE ARE UL LISTED ONLY
+ Ratings in brackets are optional extended ratings; consult factory.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (24JK9ZGM 120/60) repair pack (K24JKX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O24JKDZGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.7 Watts DC — 9.5 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" and 1/4" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 1.13 lb Conduit Valve: 1.19 lb

Repair Packs

See table above.

Options

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 General Purpose Valves Conduit

Technical drawing — MODEL 24 1/4-18 NPT 3WNO CONDUIT CONNECTION — MODEL 24
1/4-18 NPT 3WNO CONDUIT CONNECTION

Technical drawing — MODEL 24 1/8-27 NPT 3WNO CONDUIT CONNECTION — MODEL 24
1/8-27 NPT 3WNO CONDUIT CONNECTION

Technical drawing — MODEL 24 MANUAL OVERRIDE 3-WAY NORMALLY OPEN CONDUIT CONNECTION — MODEL 24
MANUAL OVERRIDE 3-WAY NORMALLY OPEN CONDUIT CONNECTION

Technical drawing — MODEL 24 METERING 3-WAY NORMALLY OPEN CONDUIT CONNECTION — MODEL 24
METERING 3-WAY NORMALLY OPEN CONDUIT CONNECTION

Series 20 General Purpose Valves DIN

Technical drawing — MODEL 24 1/4-18 NPT 3-WAY NORMALLY OPEN DIN STYLE COIL — MODEL 24
1/4-18 NPT 3-WAY NORMALLY OPEN DIN STYLE COIL

Technical drawing — MODEL 24 1/8-27 NPT 3-WAY NORMALLY OPEN DIN STYLE COIL — MODEL 24
1/8-27 NPT 3-WAY NORMALLY OPEN DIN STYLE COIL

Technical drawing — MODEL 24 MANUAL OVERRIDE 3-WAY NORMALLY OPEN DIN STYLE COIL — MODEL 24
MANUAL OVERRIDE 3-WAY NORMALLY OPEN DIN STYLE COIL

Technical drawing — MODEL 24 METERING 3-WAY NORMALLY OPEN DIN STYLE COIL — MODEL 24
METERING 3-WAY NORMALLY OPEN DIN STYLE COIL

Series 20 General Purpose Valves Grommet

Technical drawing — MODEL 24 1/4-18 NPT 3WNO GROMMET WITH LEADS — MODEL 24
1/4-18 NPT 3WNO GROMMET WITH LEADS

Technical drawing — MODEL 24 1/8-27 NPT 3WNO GROMMET WITH LEADS — MODEL 24
1/8-27 NPT 3WNO GROMMET WITH LEADS

Technical drawing — MODEL 24 MANUAL OVERRIDE 3-WAY NORMALLY OPEN GROMMET HOUSING WITH LEADS — MODEL 24
MANUAL OVERRIDE 3-WAY NORMALLY OPEN GROMMET HOUSING WITH LEADS

Technical drawing — MODEL 24 METERING 3-WAY NORMALLY OPEN GROMMET HOUSING WITH LEADS — MODEL 24
METERING 3-WAY NORMALLY OPEN GROMMET HOUSING WITH LEADS

Series 20 General Purpose Valves Yoke Leads

Technical drawing — MODEL 24 1/4-18 NPT 3-WAY NORMALLY OPEN YOKE WITH LEADS — MODEL 24
1/4-18 NPT 3-WAY NORMALLY OPEN YOKE WITH LEADS

Technical drawing — MODEL 24 1/8-27 NPT 3-WAY NORMALLY OPEN YOKE WITH LEADS — MODEL 24
1/8-27 NPT 3-WAY NORMALLY OPEN YOKE WITH LEADS

Technical drawing — MODEL 24 MANUAL OVERRIDE 3-WAY NORMALLY OPEN YOKE WITH LEADS — MODEL 24
MANUAL OVERRIDE 3-WAY NORMALLY OPEN YOKE WITH LEADS

Technical drawing — MODEL 24 METERING 3-WAY NORMALLY OPEN MOLDED COIL WITH YOKE — MODEL 24
METERING 3-WAY NORMALLY OPEN MOLDED COIL WITH YOKE

Series 20 General Purpose Valves Yoke Spades

Technical drawing — MODEL 24 1/4-18 NPT 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS — MODEL 24
1/4-18 NPT 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 24 1/8-27 NPT 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS — MODEL 24
1/8-27 NPT 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 24 MANUAL OVERRIDE 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS — MODEL 24
MANUAL OVERRIDE 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 24 METERING 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS — MODEL 24
METERING 3-WAY NORMALLY OPEN YOKE WITH SPADE TERMINALS

Series 20 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 24 1/4-18 NPT 3WNO GROMMET/BRACKET WITH LEADS — MODEL 24
1/4-18 NPT 3WNO GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 24 1/8-27 NPT 3WNO GROMMET/BRACKET WITH LEADS — MODEL 24
1/8-27 NPT 3WNO GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 24 MANUAL OVERRIDE 3WNO GROMMET/BRACKET HOUSING WITH LEADS — MODEL 24
MANUAL OVERRIDE 3WNO GROMMET/BRACKET HOUSING WITH LEADS

Technical drawing — MODEL 24 METERING 3WNO GROMMET/BRACKET HOUSING WITH LEADS — MODEL 24
METERING 3WNO GROMMET/BRACKET HOUSING WITH LEADS

Series 20 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 24 1/4-18 NPT 3WNO CONDUIT/BRACKET CONNECTION — MODEL 24
1/4-18 NPT 3WNO CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 24 1/8-27 NPT 3WNO CONDUIT/BRACKET CONNECTION — MODEL 24
1/8-27 NPT 3WNO CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 24 MANUAL OVERRIDE 3WNO CONDUIT/BRACKET CONNECTION — MODEL 24
MANUAL OVERRIDE 3WNO CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 24 METERING 3WNO CONDUIT/BRACKET CONNECTION — MODEL 24
METERING 3WNO CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Series 20 Operators Conduit

Technical drawing — MODEL O24 1/8-27 NPT 3WNO CONDUIT CONNECTION — MODEL O24
1/8-27 NPT 3WNO CONDUIT CONNECTION

Technical drawing — MODEL O24 1/4-18 NPT 3WNO CONDUIT CONNECTION — MODEL O24
1/4-18 NPT 3WNO CONDUIT CONNECTION

Series 20 Operators DIN

Technical drawing — MODEL O24 1/8-27 NPT 3WNO DIN STYLE COIL — MODEL O24
1/8-27 NPT 3WNO DIN STYLE COIL

Technical drawing — MODEL O24 1/4-18 NPT 3WNO DIN STYLE COIL — MODEL O24
1/4-18 NPT 3WNO DIN STYLE COIL

Series 20 Operators Explosion Proof

Technical drawing — MODEL O24 1/8-27 NPT 3WNO EXPLOSION PROOF — MODEL O24
1/8-27 NPT 3WNO EXPLOSION PROOF

Technical drawing — MODEL O24 1/4-18 NPT 3WNO EXPLOSION PROOF — MODEL O24
1/4-18 NPT 3WNO EXPLOSION PROOF

Series 20 Operators Grommet

Technical drawing — MODEL O24 1/8-27 NPT 3WNO GROMMET WITH LEADS — MODEL O24
1/8-27 NPT 3WNO GROMMET WITH LEADS

Technical drawing — MODEL O24 1/4-18 NPT 3WNO GROMMET WITH LEADS — MODEL O24
1/4-18 NPT 3WNO GROMMET WITH LEADS

Series 20 Operators Yoke Leads

Technical drawing — MODEL O24 1/8-27 NPT 3WNO MOLDED COIL WITH YOKE — MODEL O24
1/8-27 NPT 3WNO MOLDED COIL WITH YOKE

Technical drawing — MODEL O24 1/4-18 NPT 3WNO MOLDED COIL WITH YOKE — MODEL O24
1/4-18 NPT 3WNO MOLDED COIL WITH YOKE

Series 20 Operators Yoke Spades

Technical drawing — MODEL O24 1/8-27 NPT 3WNO YOKE WITH SPADE TERMINALS — MODEL O24
1/8-27 NPT 3WNO YOKE WITH SPADE TERMINALS

Technical drawing — MODEL O24 1/4-18 NPT 3WNO YOKE WITH SPADE TERMINALS — MODEL O24
1/4-18 NPT 3WNO YOKE WITH SPADE TERMINALS

Series 20 Operators Conduit/Bracket Connection

Technical drawing — MODEL O24 3WNO CONDUIT/BRACKET CONNECTION — MODEL O24 3WNO CONDUIT/BRACKET CONNECTION

Series 20 Operators Grommet/Bracket Connection

Technical drawing — MODEL O24 3WNO GROMMET/BRACKET HOUSING WITH LEADS — MODEL O24 3WNO GROMMET/BRACKET HOUSING WITH LEADS

Series 20 Model H24

Read more about Series 20 Model H24

Using the heart of the highly successful model H22, Peter Paul Electronics Co., Inc., has a valve that allows the same media control as a three way normally open valve but at much higher pressure ratings than previously available. Pressure applied to the "IN" port must always be equal to or greater than the pressure in "CYL" port. Air and other non-corrosive gases, water and oil.

Made for higher pressure ratings.
Precision stainless steel plunger.
Kel-F pin and elastomeric sealing elements.
Orifice guides the sealing pin for near perfect alignment.
Simple construction...only three moving parts.

Valve specifications — Series 20 Model H24
MAX. OPER. PRESS. DIFF.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING		VALVE NUMBER CONDUIT HOUSING
DC	INLET	EXH	INLET	EXH	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

1000*	0.6 mm	1/32	.010	.022	H24MG7XGM	H24MG9ZGM	H24MG7XCM	H24MG9ZCM

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (H24MG7XGM 12/DC) repair pack (KH24MGX DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH24MGDXGM 12/DC)

Coil Voltage

6, 12, 24, 125/DC

Nominal Power

DC — 9.5 Watts

Coil Construction

Molded Class F (Std.), Potted and Class H Option

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM with gas media

Duty Cycle

Continuous

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Sealing Pin

Kel-F (Std.), Delrin®, PEEK

Orifice Diameter

See table above.

Porting

1/8" and 1/4" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.

Mounting

Must be mounted within 30° of vertical.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.17 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Alternate Elastomers, Alternate Sealing Pin Materials, Spade Terminal Coil, and European Style DIN Coil, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102*

Media

Air and other non-corrosive gases, water and oil.

Filtration

Down to 60 microns or less is recommended.

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

10,000 PSI

Leakage

Bubble tight.

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 High Pressure Valves Conduit Connection

Technical drawing — MODEL H24 1/4 NPT 3WNO HIGH PRESSURE CONDUIT CONNECTION — MODEL H24
1/4 NPT 3WNO HIGH PRESSURE CONDUIT CONNECTION

Technical drawing — MODEL H24 1/8 NPT 3WNO HIGH PRESSURE CONDUIT CONNECTION — MODEL H24
1/8 NPT 3WNO HIGH PRESSURE CONDUIT CONNECTION

Series 20 High Pressure Valves DIN Connection

Technical drawing — MODEL H24 1/4 NPT 3WNO HIGH PRESSURE DIN 43650 STYLE COIL — MODEL H24
1/4 NPT 3WNO HIGH PRESSURE DIN 43650 STYLE COIL

Technical drawing — MODEL H24 1/8 NPT 3WNO HIGH PRESSURE DIN 43650 STYLE COIL — MODEL H24
1/8 NPT 3WNO HIGH PRESSURE DIN 43650 STYLE COIL

Series 20 High Pressure Valves Grommet Connection

Technical drawing — MODEL H24 1/4 NPT 3WNO HIGH PRESSURE GROMMET STYLE COIL — MODEL H24
1/4 NPT 3WNO HIGH PRESSURE GROMMET STYLE COIL

Technical drawing — MODEL H24 1/8 NPT 3WNO HIGH PRESSURE GROMMET STYLE COIL — MODEL H24
1/8 NPT 3WNO HIGH PRESSURE GROMMET STYLE COIL

Series 20 High Pressure Valves Yoke Leads

Technical drawing — MODEL H24 1/4 NPT 3WNO HIGH PRESSURE YOKE WITH LEADS — MODEL H24
1/4 NPT 3WNO HIGH PRESSURE YOKE WITH LEADS

Technical drawing — MODEL H24 1/8 NPT 3WNO HIGH PRESSURE YOKE WITH LEADS — MODEL H24
1/8 NPT 3WNO HIGH PRESSURE YOKE WITH LEADS

Series 20 High Pressure Valves Yoke Spades

Technical drawing — MODEL H24 1/4 NPT 3WNO HIGH PRESSURE YOKE WITH SPADE TERMINALS — MODEL H24
1/4 NPT 3WNO HIGH PRESSURE YOKE WITH SPADE TERMINALS

Technical drawing — MODEL H24 1/8 NPT 3WNO HIGH PRESSURE YOKE WITH SPADE TERMINALS — MODEL H24
1/8 NPT 3WNO HIGH PRESSURE YOKE WITH SPADE TERMINALS

Stainless Steel (Std.)

Subscribe to