| PeterPaul

Series L58 Model L583 - Piped Exhaust

Read more about Series L58 Model L583 - Piped Exhaust

Series L58 Model L583 - Piped Exhaust flow diagram

Easily interfaced with circuit boards and miniaturized components. The versatility is for connecting electronic signals to pneumatic outputs. The small size is ideal for stand-alone use with #10-32 ports or multiple valves mounted on one manifold. Air and other common gases; filtration recommended, 30 microns or less.

May be used to pilot larger valves.
Ideal for micro electronic production equipment.
Great for medical and chemical analytical applications.
Can operate directly from most programmable controllers.
High quality engineering.

VALVE SPECIFICATIONS

Valve specifications — Series L58 Model L583 - Piped Exhaust
MAX. OPER. PRESS. DIFF.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER
DC	INLET	EXH	INLET	EXH	VALVE NUMBER

145	0.6 mm	0.6 mm	.010	.010	L583AA19PGM
145	0.6 mm	0.8 mm	.010	.020	L583AF19PGM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (L583AF19PGM 12/DC) repair pack (L583AF19G DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OL583AFDPGM 12/DC)

Coil Voltage

12, 24/DC

Nominal Power

DC — 0.9 Watts

Coil Construction

Molded Class A with leadwires (Std.), Micro DIN (Opt.)

Typical Response Time on Air

DC - 9 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

#10-32 and Manifold Mount

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.13 lbs

Repair Packs

See table above.

Options

Round Stainless Steel, Male Stud Mount, and Manifold Mount*

Media

Air and other common gasses - filtration recommended - 30 microns or less.

Valve Temperature Range

Standard Valves – 5°F (-15°C) to 122°F (50°C) ambient and media. Note Do not allow water to freeze when using plastic body.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

1500 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 58

Nomenclature Chart (58 series)

Series L58 Model L583 Piped Leads Connection

Technical drawing — MODEL L583 3WNC PIPED EXHAUST MOLDED COIL WITH LEADS PLASTIC BODY WITH 10-32 PORTS — MODEL L583 3WNC PIPED EXHAUST MOLDED COIL WITH LEADS PLASTIC BODY WITH 10-32 PORTS

Technical drawing — MODEL L583 3WNC PIPED EXHAUST MOLDED LEAD STYLE COIL STAINLESS STEEL BODY WITH 10-32 PORTS — MODEL L583 3WNC PIPED EXHAUST MOLDED LEAD STYLE COIL STAINLESS STEEL BODY WITH 10-32 PORTS

Technical drawing — MODEL L583 3WNC PIPED EXHAUST MOLDED LEADS COIL MANIFOLD MOUNT PLASTIC BODY — MODEL L583 3WNC PIPED EXHAUST MOLDED LEADS COIL MANIFOLD MOUNT PLASTIC BODY

Technical drawing — MODEL L583 3WNC PIPED EXHAUST MOLDED LEADS COIL STUD MANIFOLD MOUNT WITH STAINLESS STEEL BODY — MODEL L583 3WNC PIPED EXHAUST MOLDED LEADS COIL STUD MANIFOLD MOUNT WITH STAINLESS STEEL BODY

Polyester Plastic (Std.), Stainless Steel (Opt.)

Series 58 Operators Molded Leads

Technical drawing — MODEL OL583 PIPED EXHAUST 3WNC MOLDED COIL WITH LEADS — MODEL OL583
PIPED EXHAUST 3WNC MOLDED COIL WITH LEADS

Series EL50 Model EL53 - Piped Exhaust

Read more about Series EL50 Model EL53 - Piped Exhaust

Series EL 50 Model EL53 - Piped Exhaust flow diagram

PeterPaul explosion proof valves are used where fire or explosion hazards exist due to the presence of flammable gases or vapors, flammable liquids, combustible dust, or easily ignitable fibers. Hazardous Location valves are recommended, or in some cases compulsory, where a high level of protection from explosion is required.

Miniature Hazardous Location valves using even less power than an E53.
Flame-proof construction.
High quality engineering.

Valve specifications — Series EL 50 Model EL53 - Piped Exhaust
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER
AC	DC	INLET	EXH	INLET	EXH	NORTH AMERICAN VALVE NUMBER

120	120	1/32	1/32	.022	.048	EL53GG8XCCM-∆
120	120	1/32	3/64	.055	.048	EL53GH8XCCM-∆
60	60	3/64	3/64	.055	.048	EL53HH8XCCM-∆
30	30	1/16	1/16	.075	.075	EL53JJ8XCCM-∆

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (EL53HH8XCCM 120/60) repair pack (5KEL53HHX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OEL53HHDXCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 1.8 Watts, DC — 1.8 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Flame-Proof construction with 1/2" NPT conduit

Listings

Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D - Class II, Div 1, Groups E, F, and G: Div 2, Groups A, B, C, D, E, F, and G.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.65 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers and All Stainless Steel Construction*

Media

Air and other common gases and common refrigerants except ammonia, city gas supplies by public utilities, Nos. 1 and 2 fuel oils, oils having viscosities not more than 40, SU at 100° F, steam, some hydraulic and water or other aqueous non-flammable liquid

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series EL 50 Hazardous Location Valves

Technical drawing — MODEL EL53 1/8-27 NPT 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL EL53
1/8-27 NPT 3WNC PIPED EXHAUST EXPLOSION PROOF

Technical drawing — MODEL EL53 10-32 PORTS 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL EL53
10-32 PORTS 3WNC PIPED EXHAUST EXPLOSION PROOF

Technical drawing — MODEL EL53 BODY OPTION "E" 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL EL53
BODY OPTION "E" 3WNC PIPED EXHAUST EXPLOSION PROOF

Technical drawing — MODEL EL53 BODY OPTION "O" 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL EL53
BODY OPTION "O" 3WNC PIPED EXHAUST EXPLOSION PROOF

Technical drawing — MODEL EL53 BODY OPTION "R" 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL EL53
BODY OPTION "R" 3WNC PIPED EXHAUST EXPLOSION PROOF

Technical drawing — MODEL EL53 METERED BODY 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL EL53
METERED BODY 3WNC PIPED EXHAUST EXPLOSION PROOF

Stainless Steel (Std.)

Series 50 Operators Explosion Proof

Technical drawing — MODEL OEL53 3WNC PIPED EXHAUST EXPLOSION PROOF — MODEL OEL53 3WNC PIPED EXHAUST EXPLOSION PROOF

Certification

North American

Series 20 Model MLV25 (REVERSE POLARITY)

Read more about Series 20 Model MLV25 (REVERSE POLARITY)

Series 20 Model MLV25 (REVERSE POLARITY) solenoid operator

DIN coil (2 terminals with ground) wiring diagram

Series 20 Model MLV25 (REVERSE POLARITY) flow diagram

3-Way Directional Control Reverse Polarity Valve - This type of valve is often used in remote areas where continuous power may not be available or with battery-powered portable equipment where power capacity is limited, as it only uses power during latching and un-latching. It is also valuable in equipment where coil heating, due to continuous application of power, is undesirable. Air and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials.

Neutral (−) a. Pulse Yellow lead to Positive (+) to latch b. Pulse Blue lead to Positive (+) to un-latch

Positive (+) a. Pulse Yellow lead to Neutral (−) to un-latch b. Pulse Blue lead to Neutral (−) to latch

VALVE SPECIFICATIONS

Valve specifications — Series 20 Model MLV25 (REVERSE POLARITY)
MAX. OPER.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER DIN COIL (2 TERMINALS WITH GROUND)		VALVE NUMBER 2 WIRE COIL
PRESS. DIFF.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER DIN COIL (2 TERMINALS WITH GROUND)		VALVE NUMBER 2 WIRE COIL
DC	N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

500*	1/32	1/32	.024	.024	25GG7XELM-∆	25GG9ZELM-∆	25GG7XGLM-∆	25GG9ZGLM-∆
235	3/64	3/64	.052	.052	25HH7XELM-∆	25HH9ZELM-∆	25HH7XGLM-∆	25HH9ZGLM-∆
200	1/16	3/64	.095	.052	25JH7XELM-∆	25JH9ZELM-∆	25JH7XGLM-∆	25JH9ZGLM-∆
150	1/16	1/16	.095	.095	25JJ7XELM-∆	25JJ9ZELM-∆	25JJ7XGLM-∆	25JJ9ZGLM-∆
100	3/32	3/32	.156	.156	25KK7XELM-∆	25KK9ZELM-∆	25KK7XGLM-∆	25KK9ZGLM-∆
100	1/8	3/32	.214	.156	25NK7XELM-∆	25NK9ZELM-∆	25NK7XGLM-∆	25NK9ZGLM-∆

* FKM seals not recommended for pressures of 500 psi and above.

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (25JJ7XELM-∆ 12/DC) repair pack (K25JJXL DC)

Coil Voltage

6, 9, 12, 24/DC

Nominal Power

DC — 10.0 Watts

Coil Construction

Molded Class B with DIN 43650 Form A Connector (Std.), Leadwires (Opt.) For your convenience we have the female DIN style mating connector No. 20-198** available for an additional fee.*

Typical Response Time on Air

Approximate 50 millisecond pulse to energize and de-energize.

Operating Speed

Up to 600 CPM

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8” and 1/4” NPT (other ports available).*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.2 lb average

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102. Consult representative or factory for more options & specifications.

Media

Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series MLV20 Model 25 Magnetic Latching (Reverse Polarity)

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL

Technical drawing — MODEL 25 BODY OPTION "E" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL — MODEL 25
BODY OPTION "E" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL

Technical drawing — MODEL 25 BODY OPTION "O" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL — MODEL 25
BODY OPTION "O" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL

Technical drawing — MODEL 25 BODY OPTION "R" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL — MODEL 25
BODY OPTION "R" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 25 BODY OPTION "E" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS — MODEL 25
BODY OPTION "E" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 25 BODY OPTION "O" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS — MODEL 25
BODY OPTION "O" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 25 BODY OPTION "R" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS — MODEL 25
BODY OPTION "R" 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL MAGNETIC LATCHING COIL WITH LEADS

Stainless Steel (Std.) or Brass (Opt.)

Series E50 Model E53 - Exhaust to Atmosphere

Read more about Series E50 Model E53 - Exhaust to Atmosphere

Series E50 Model E53 - Exhaust to Atmosphere flow diagram

Miniature Hazardous Location valve.
Flame-proof construction.
High quality engineering.

VALVE SPECIFICATIONS

Valve specifications — Series E50 Model E53 - Exhaust to Atmosphere
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER
AC	DC	INLET	EXH	INLET	EXH	NORTH AMERICAN VALVE NUMBER

200	200	1/32	1/32	.022	.020	E53GG8DCCM-∆
150	150	3/64	3/64	.055	.048	E53HH8DCCM-∆
150	150	3/64	1/16	.055	.075	E53HJ8DCCM-∆
100	100	1/16	1/16	.075	.075	E53JJ8DCCM-∆
60	60	3/32	1/16	.156	.075	E53KJ8DCCM-∆
50	50	3/32	3/32	.156	.156	E53KK8DCCM-∆
30	30	1/8	1/16	.230	.075	E53NJ8DCCM-∆
30	30	1/8	3/32	.230	.156	E53NK8DCCM-∆

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (E53HJ8DCCM 120/60) repair pack (5KE53HJD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE53HJDDCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 5.6 Watts DC — 7.2 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Flame-Proof construction with 1/2" NPT conduit

Listings

Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D - Class II, Div 1, Groups E, F, and G; Div 2, Groups A, B, C, D, E, F, and G

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.40 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers, All Stainless Steel Construction*

Media

Air, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series E50 Hazardous Location Valves

Technical drawing — MODEL E53 1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL E53
1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL E53 10-32 BODY PORTS 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL E53
10-32 BODY PORTS 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL E53 BODY OPTION "E" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL E53
BODY OPTION "E" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL E53 BODY OPTION "O" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL E53
BODY OPTION "O" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL E53 BODY OPTION "R" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL E53
BODY OPTION "R" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL E53 METERED BODY 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL E53
METERED BODY 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Stainless Steel (Std.)

Series 50 Operators Explosion Proof

Technical drawing — MODEL OE53 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL OE53 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Certification

North American

Series 70 Model N76

Read more about Series 70 Model N76

The 70 line PeterPaul Hazardous Location valves are UL listed and certified for non-incendive Hazardous Locations — Class I, Div 2, Groups A, B, C and D; Class II, Div 2, Groups E, F and G; T3C temperature rating.

Largest direct acting non-piloted valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model N76
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	1/4 NPT PORTS

225	225	1/16	1/16	.09	.09	N76JJ9ZCP
150	150	3/32	3/32	.22	.22	N76KK9ZCP
100	100	1/8	1/8	.35	.35	N76NN9ZCP
75	75	5/32	5/32	.45	.45	N76OO9ZCP
60	60	3/16	3/16	.50	.50	N76PP9ZCP

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (N76KK9ZCP 120/60) repair pack (NK76KKX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (ON76KKDZCP 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Potted Class F. (Class H optional)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers * Consult representative or factory for options and specifications.

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 70 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 70

Nomenclature Chart (non 58 series)

Series 70 HAZARDOUS LOCATION VALVES

Technical drawing — MODEL N76 1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL N76
1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Technical drawing — MODEL N76 1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL N76
1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Certification

North American

Series 20 Model H23 - Piped Exhaust

Read more about Series 20 Model H23 - Piped Exhaust

Series 20 Model H23 - Piped Exhaust flow diagram

PeterPaul’s model H23 has a dual operator valve that allows the same media control as a three-way normally closed valve but at much higher pressure ratings than previously available. To function as a 3-way normally closed valve, operators must be alternately energized and de-energized. Pressure applied to the “IN” port must always be equal to or greater than the pressure in the “CYL” port. Air and other non-corrosive gases, water, and oil.

Made for higher pressure ratings.
Precision stainless steel, free-floating plunger.
Kel-F pin sealing element.
Orifice guides the sealing pin for near-perfect alignment.

Valve specifications — Series 20 Model H23
GAS PRESSURE RATINGS		ORIFICE SIZE	CV FACTOR	VALVE NUMBER
AC	DC	ORIFICE SIZE	CV FACTOR	1/4 NPT PORTS

3000*	3000*	1/32	.022	H23GG19DCMG
2500*	1500*	3/64	.041	H23HH19DCMG
1750*	500	1/16	.065	H23JJ19DCMG
650*	100	3/32	.100	H23KK19DCMG
LIQUID PRESSURE RATINGS		ORIFICE SIZE	CV FACTOR	VALVE NUMBER
AC	DC	ORIFICE SIZE	CV FACTOR	1/4 NPT PORTS

3000*	3000*	1/32	.022	H23GG19DCML
1500*	1500*	3/64	.041	H23HH19DCML
1000*	500	1/16	.065	H23JJ19DCML
300	100	3/32	.100	H23KK19DCML

* FKM seals not recommended for pressure above 500 psi.

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (H23JJ19DCMG 120/60) repair pack (KH23JJ AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OH23JJDDCMG 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 7.3 Watts DC — 9.5 Watts (Per Operator)

Coil Construction

Molded (Std.) and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM with gas media

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Sealing Pin

Kel-F (Std.), Delrin®, PEEK

Orifice Diameter

See table above.

Porting

1/4" NPT

Housing

Grommet or 1/2" NPT conduit

Mounting

Must be mounted within 30° of vertical.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

3.63 lbs

Repair Packs

See table above.

Options

Alternate Sealing Pin Materials and Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102*

Media

Air and other non-corrosive gasses, water and oil.

Filtration

Down to 60 microns or less is recommended.

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

10,000 PSI

Leakage

Bubbletight (with polymer sealing pins)

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 High Pressure Valves Conduit

Technical drawing — MODEL H23 3WNC HIGH PRESSURE CONDUIT CONNECTION — MODEL H23 3WNC HIGH PRESSURE CONDUIT CONNECTION

300 Series Stainless Steel

Series 70 Model N75

Read more about Series 70 Model N75

The N70 line PeterPaul Hazardous Location valves are UL listed and certified for non-incendive Hazardous Location Class 1, Div 2, Groups A, B, C and D; Class 2, Div 2, Groups E, F and G; T3C temperature rating.

Largest direct acting non-piloted valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model N75
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER GROMMET HOUSING
AC	DC	N.O.	N.C.	N.O.	N.C.	1/4 NPT PORTS

350	350	1/16	1/16	.09	.09	N75JJ9ZCP
250	250	3/32	3/32	.22	.22	N75KK9ZCP
175	175	1/8	1/8	.35	.35	N75NN9ZCP
125	125	5/32	5/32	.45	.45	N75OO9ZCP
100	100	3/16	3/16	.50	.50	N75PP9ZCP

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (N75OO9ZCP 120/60) repair pack (KN75OOX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (ON75OODZCP 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*

Housing

1/2′′ NPT conduit*

Listings

Listed and Certified for Non-Incendive Hazardous Locations Class 1, Div 2, Groups A, B, C and D; Class 2, Div 2, Groups E, F and G; T3C Temperature rating.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers * Consult representative or factory for options and specifications.

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 70

Nomenclature Chart (non 58 series)

Series 70 Hazardous Location Valves

Technical drawing — MODEL N75 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL N75
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Technical drawing — MODEL N75 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION — MODEL N75
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Certification

North American

Series 20 Model MLV22 (FIXED POLARITY)

Read more about Series 20 Model MLV22 (FIXED POLARITY)

Series 20 Model MLV22 (FIXED POLARITY) solenoid operator

DIN coil (3 terminals with ground) wiring diagram

Series 20 Model MLV22 (FIXED POLARITY) flow diagram

2-Way Fixed Polarity Magnet Latching Valve - This type of valve is often used in remote areas where continuous power may not be available or with battery-powered portable equipment where power capacity is limited. It is also valuable in equipment where coil heating, due to continuous application of power, is undesirable. Air, water and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require other seal materials.

There are two ways to latch and un-latch the valve.

Common Black wire set to Neutral (-) a. Pulse Yellow lead to Positive (+) to latch b. Pulse Blue lead to Positive (+) to un-latch

Common Black wire set to Positive (+) a. Pulse Yellow lead to Neutral (-) to un-latch b. Pulse Blue lead to Neutral (-) to latch

Valve specifications — Series 20 Model MLV22 (FIXED POLARITY)
MAX. OPER. PRESS. DIFF.	ORIFICE SIZE	CV FACTOR	VALVE NUMBER DIN COIL (3 TERMINALS WITH GROUND)		VALVE NUMBER 3 WIRE COIL
DC	ORIFICE SIZE	CV FACTOR	1/8 NPT PORT	1/4 NPT Port	1/8 NPT PORTS	1/4 NPT PORTS

500*	1/32	.024	22G7D4LM-∆	22G9D4LM-∆	22G7D3LM-∆	22G9D3LM-∆
500*	3/64	.052	22H7D4LM-∆	22H9D4LM-∆	22H7D3LM-∆	22H9D3LM-∆
215	1/16	.095	22J7D4LM-∆	22J9D4LM-∆	22J7D3LM-∆	22J9D3LM-∆
150	3/32	.156	22K7D4LM-∆	22K9D4LM-∆	22K7D3LM-∆	22K9D3LM-∆
120	1/8	.214	22N7D4LM-∆	22N9D4LM-∆	22N7D3LM-∆	22N9D3LM-∆
80	5/32	.404	22O7D4LM-∆	22O9D4LM-∆	22O7D3LM-∆	22O9D3LM-∆
35	3/16	.500	22P7D4LM-∆	22P9D4LM-∆	22P7D3LM-∆	22P9D3LM-∆
25	1/4	.700	22R7D4LM-∆	22R9D4LM-∆	22R7D3LM-∆	22R9D3LM-∆

* FKM seals not recommended for pressures of 500 psi and above.

Ordering Information

Seal Material: Replace ∆ with desired code — Blank = Nitrile (Buna), S = Low Temp Buna, N = FKM*, E = Neoprene, A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. Examples: valve (22J7D3LM 12/DC), repair pack (K22J3L DC)

Coil Voltage

6, 9, 12, 24/DC

Nominal Power

8.0 Watts

Coil Construction

Molded Class B with three - 24” leadwires

Typical Response Time on Air

Approximate 50 millisecond pulse to energize and de-energize.

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) standard. FKM, EPDM, Neoprene and Low Temp Nitrile (Buna) are available.*

Orifice Diameter

See table above.

Porting

1/8” OR 1/4” NPT

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.2 lb average

Repair Packs

See table above.

Options

Media

Air, water, and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require other seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5,000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series MLV20 Model 22 Magnetic Latching (Fixed Polarity)

Technical drawing — MODEL 22 3-WIRE 1/8-27 NPT 2WNC MAGNETIC LATCHING COIL WITH LEADS — MODEL 22
3-WIRE 1/8-27 NPT 2WNC MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 22 3-WIRE 1/4-18 NPT 2WNC MAGNETIC LATCHING COIL WITH 3 LEADWIRES — MODEL 22
3-WIRE 1/4-18 NPT 2WNC MAGNETIC LATCHING COIL WITH 3 LEADWIRES

Technical drawing — MODEL 22 4 PIN DIN 1/8-27 NPT 2WNC MAGNETIC LATCHING COIL — MODEL 22
4 PIN DIN 1/8-27 NPT 2WNC MAGNETIC LATCHING COIL

Technical drawing — MODEL 22 4 PIN DIN 1/4-18 NPT 2WNC MAGNETIC LATCHING COIL — MODEL 22
4 PIN DIN 1/4-18 NPT 2WNC MAGNETIC LATCHING COIL

Stainless Steel

Series 20 Operators Latching

Technical drawing — MODEL O22 2WNC MAGNETIC LATCHING COIL — MODEL O22 2WNC MAGNETIC LATCHING COIL

Series 20 Operators Latching Leads

Technical drawing — MODEL O22 2WNC MAGNETIC LATCHING COIL WITH LEADS — MODEL O22 2WNC MAGNETIC LATCHING COIL WITH LEADS

Series 70 Ventilator Valve 76X00950GM 24/DC

Read more about Series 70 Ventilator Valve 76X00950GM 24/DC

3-Way Dual-Inlet, Single Outlet Direct acting valve switches inlet breath pressure to outlet breath pressure. Can run air to 100% oxygen. Very high CV flow coefficient. Very quiet operation.

Very quiet switching operation.
Controls the flow of air (up to 100% oxygen).

Valve specifications — Series 70 Ventilator Valve 76X00950GM 24/DC
+ MAX. OPER. PRESS. DIFF. DC	ORIFICE SIZE	CV FACTOR	VALVE NUMBER

2	1/4"	2.2	76X00950GM 24/DC

Coil Voltage

12, 24/DC

Nominal Power

12.5 Watts

Coil Construction

Molded, Class F.

Duty Cycle

Continuous

Internal Components

Stainless Steel.

Elastomers

Nitrile (Buna).

Orifice Diameter

See table above.

Porting

See drawing

Housing

Grommet with mounting bracket.

Life Expectancy

Over 10 Million cycles.

Valve Weight

2.1325 lbs

Media

Air up to 100% oxygen

Valve Temperature Range

0°F (-18°C) to 104°F (40°C) ambient

Maximum Operating Pressure Differentials

2 psi

Leakage

Bubble tight.

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 70 3-Way Multi-Purpose Ventilator Valve

Technical drawing — MODEL 76X00950GM 24/DC 3-WAY MULTI-PURPOSE VENTILATOR VALVE — MODEL 76X00950GM
24/DC 3-WAY MULTI-PURPOSE VENTILATOR VALVE

Brass

Series 70 Model 71

Read more about Series 70 Model 71

Super valves that have ratings that formerly required valves of much greater size. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Largest direct acting (non-piloted) valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model 71
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE	CV FACTOR	VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	ORIFICE SIZE	CV FACTOR	1/4 NPT PORTS	1/4 NPT PORTS

350	350	1/16	.09	71J9ZGM	71J9ZCM
250	250	3/32	.22	71K9ZGM	71K9ZCM
175	175	1/8	.35	71N9ZGM	71N9ZCM
125	125	5/32	.45	71O9ZGM	71O9ZCM
100	100	3/16	.50	71P9ZGM	71P9ZCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (71P9ZCM 120/60) repair pack (K71PDX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O71PDZCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Molded Class F (Std.), Potted and Class H Option

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 2.00 lb Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 70 2WNO DIN STYLE COIL

Technical drawing — MODEL 71 1/4-18 NPT 2WNO DIN STYLE COIL — MODEL 71
1/4-18 NPT 2WNO DIN STYLE COIL

Series 70 General Purpose Valves Conduit

Technical drawing — MODEL 71 1/4-18 NPT 2WNO CONDUIT CONNECTION — MODEL 71
1/4-18 NPT 2WNO CONDUIT CONNECTION

Series 70 General Purpose Valves Grommet

Technical drawing — MODEL 71 1/4-18 NPT 2WNO GROMMET WITH LEADS — MODEL 71
1/4-18 NPT 2WNO GROMMET WITH LEADS

Series 70 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 71 1/4-18 NPT 2WNO GROMMET/BRACKET WITH LEADS — MODEL 71
1/4-18 NPT 2WNO GROMMET/BRACKET WITH LEADS

Series 70 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 71 1/4-18 NPT 2WNO CONDUIT/BRACKET CONNECTION — MODEL 71
1/4-18 NPT 2WNO CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Series 70 Operators Conduit

Technical drawing — MODEL O71 2WNO CONDUIT CONNECTION — MODEL O71 2WNO CONDUIT CONNECTION

Series 70 Operators Conduit/Bracket Connection

Technical drawing — MODEL O71 2WNO CONDUIT/BRACKET CONNECTION — MODEL O71 2WNO CONDUIT/BRACKET CONNECTION

Series 70 Operators Grommet

Technical drawing — MODEL O71 2WNO GROMMET HOUSING WITH LEADS — MODEL O71 2WNO GROMMET HOUSING WITH LEADS

Series 70 Operators Grommet/Bracket Connection

Technical drawing — MODEL O71 2WNO GROMMET/BRACKET WITH LEADS — MODEL O71 2WNO GROMMET/BRACKET WITH LEADS

Subscribe to