CONTACT US: 1-860-229-4884|sales@peterpaul.com

News/Articles

Solenoid Valves Control Alternative Energy's Future

Air, Water or any Media? Going Green is possible with PeterPaul. Peter Paul Electronics Co. Inc. designs, supplies and manufactures both components and entire managing systems to reliably control Alternative Energy solutions through any media type such as gas or liquid. The control system that...

Why choose a Plastic Valve vs. Metal Valve?

FOR IMMEDIATE RELEASE: February 12 th , 2010 NEW BRITAIN, CT, February 12, 2010 – Peter Paul Electronics, Co., Inc, explains why in rugged, dirty, corrosive application one is better served by a plastic valve with an encapsulated coil over a metal valve. The points of differentiation follow: The...

Solenoid Valves for the Medical Industry

Peter Paul Electronics Co., Inc. manufactures an extensive line of solenoid operators and valves for original equipment manufacturers who serve the medical industry. Some of the PeterPaul valves adapted by these manufacturers appear above, with a brief description below of their applications...

Refrigerant Valves And Manifolds

These are some typical 2-way and 3-way normally open and closed low power solenoid valves that are intended for portable refrigerant recovery-recycling systems. Their inlet pressure ratings range up to 500 psi. They come equipped with 1/8" and 1/4" NPT pipe ports, 3/8" copper sweat tubing, or with...

Peter Paul Announces Media Isolation Valves for Continous and Intermittent Duty

A compact, Series 50 Solenoid Valve utilizing a molded nylon body and a diaphragm which isolates potentially corrosive media from the valve operator parts compatible with nitrile (Buna N), silicone, EPDM, and other available elastomers is now offered by Peter Paul Electronics Co., Inc., New Britain...

Line of Solenoid Valves and Manifolds for CFC Recovery Systems Announced By Peter Paul

Background: Peter Paul Electronics provides a number of solenoid valve and manifold combinations for the refigerant recovery / recycle equipment market, including Series 50 valves and Series 20 (center and lower right) valves, plus stainless steel, brass, and aluminum manifolds. The built-in...

Metering Adapter Adds To Utility Of Our Series 20 and 30 Solenoid Valves

A new, adjustable, stainless steel metered adapter for Series 20 and 30, 2-way N.O. and 3-way solenoid valves provides a manually adjustable flow control to a valve which creates a speed control for the process the valve is controlling. Adjustable, stainless steel metering adapters shown mounted on...

New High Pressure, Economical Series 20 Valve

New Britain, CT PeterPaul now offers high pressure Series 20 Models H21 & H24 valves with a redesigned guide pin that provides high seal ability at lower cost. Standard operating pressures are to 2,000 psi (H21) and 1,000 psi (H24), in gas or liquid. Higher-pressure ratings are also available (...

EPDM Seals

Special EPDM (Ethylene Propylene Diene Monomers) solenoid valve seals are used for applications where high-pressure gases tend to be absorbed in standard rubber seals. Solenoid valve plunger travel stroke is typically 0.020 to 0.050 in., depending on orifice size. Choosing the wrong seal material...

PeterPaul Develops New FKM Seals for Gasoline and Propane Valve Applications

Today's alternative powered vehicles and reformulated gasoline’s are causing increased occurrences of solenoid valve seal swelling and cracking in service. This has created the need to reformulate existing FKM compounds to maximize their properties in reformulated gasoline’s, which have significant...

Swell Resistent Printers Gum

Another thing we've done is a special elastomer for use with water-based printing links. We think of ink as being almost benign, but sometimes it can be rather aggressive to certain materials, and swelling of the rubber typically causes a big problem in the dispensing valves for ink. Peter Paul has...

Cryogenic Valves For Low Temperature Applications

Our solenoid valves, those precision electro-mechanical “switches” required to perform millions of unattended cycles in applications ranging from coffee vending machines to metal cutting machine tools, are also widely employed at low temperatures to about –40°C involving gaseous and liquid...