| PeterPaul

Series 58 Model 585

Read more about Series 58 Model 585

Easily interfaced with circuit boards and miniaturized components. The versatility is for connecting electronic signals to pneumatic outputs. The small size is ideal for stand alone (with #10-32 UNF-2B ports) or multiple valves mounted on one manifold. Air and other common gases — filtration recommended — 30 microns or less.

May be used to "pilot" larger valves.
Ideal for micro electronic production equipment.
Great for medical and chemical analytical applications.
Can operate directly from most programmable controllers.
High quality engineering.

Valve specifications — Series 58 Model 585
MAX. OPER. PRESS. DIFF.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER
DC	N.C.	N.O.	N.C.	N.O.	LEADWIRE

300	0.6 mm	0.6 mm	.010	.010	585AA19PGM
200	0.8 mm	0.8 mm	.020	.020	585FF19PGM
50	1.0 mm	1.0 mm	.030	.030	585MM19PGM
35	1.2 mm	1.2 mm	.034	.034	585WW19PGM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (585MM19PGM 12/DC) repair pack (K585MM19 DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O585MMDPGM 12/DC)

Coil Voltage

12, 24/DC

Nominal Power

DC — 3.5 Watts

Coil Construction

Molded Class A with leadwires

Typical Response Time on Air

DC — 9 Milliseconds

Operating Speed

Up to 1000 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

#10-32 UNF-2B

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.13 lbs

Repair Packs

See table above.

Options

Round Stainless Steel, Male Stud Mount, and Manifold Mount*

Media

Air and other common gases — filtration recommended — 30 microns or less.

Valve Temperature Range

Standard Valves – 5°F (-15°C) to 122°F (50°C) ambient; media.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

1500 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (58 series)

Series 58 Model 585 Molded Leads

Technical drawing — MODEL 585 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH LEADS PLASTIC BODY WITH 10-32 PORTS — MODEL 585 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH LEADS PLASTIC BODY WITH 10-32 PORTS

Technical drawing — MODEL 585 3-WAY DIRECTIONAL CONTROL PIPED EXHAUST MOLDED LEAD STYLE COIL STAINLESS STEEL BODY WITH 10-32 PORTS — MODEL 585 3-WAY DIRECTIONAL CONTROL PIPED EXHAUST MOLDED LEAD STYLE COIL STAINLESS STEEL BODY WITH 10-32 PORTS

Technical drawing — MODEL 585 3-WAY DIRECTIONAL CONTROL PIPED EXHAUST MOLDED LEADS COIL MANIFOLD MOUNT PLASTIC BODY — MODEL 585 3-WAY DIRECTIONAL CONTROL PIPED EXHAUST MOLDED LEADS COIL MANIFOLD MOUNT PLASTIC BODY

Technical drawing — MODEL 585 3-WAY DIRECTIONAL CONTROL PIPED EXHAUST MOLDED LEADS COIL STUD MANIFOLD MOUNT WITH STAINLESS STEEL BODY — MODEL 585 3-WAY DIRECTIONAL CONTROL PIPED EXHAUST MOLDED LEADS COIL STUD MANIFOLD MOUNT WITH STAINLESS STEEL BODY

Polyester Plastic (Std.), Stainless Steel (Opt.)

Series 58 Operators Molded Leads

Technical drawing — MODEL O585 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH LEADS — MODEL O585 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH LEADS

Series 15 Model 156

Read more about Series 15 Model 156

The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas and liquid media at pressures from vacuum to 125 psi — depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.

Small, lightweight and economical.
Operating pressures from vacuum to 125 psi.
Standard without many options.

Valve specifications — Series 15 Model 156
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING

125	125	1/32	1/32	.022	.020	156GG2XGM	156GG2XEM	156GG2XCM
100	100	3/64	3/64	.055	.048	156HH2XGM	156HH2XEM	156HH2XCM
65	50	1/16	1/16	.075	.075	156JJ2XGM	156JJ2XEM	156JJ2XCM
25	25	3/32	3/32	.130	.130	156KK2XGM	156KK2XEM	156KK2XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (156JJ2XEM 120/60) repair pack (K156JX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O156JJDXEM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.5 Watts, DC — 10.5 Watts

Coil Construction

Molded Class F. (155°C)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Leadwires, 1/2” NPT Conduit and DIN Style Connector.

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.27 lb to 0.30 lb depending on model and housing style.

Repair Packs

See table above.

Options

Round Brass or Stainless Steel Body, Stackable Construction, Alternate Elastomers and Magnetic Latching Coil. Female DIN Style Connector Part Number 50-17029.*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 15 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 15 General Purpose Valves

Technical drawing — MODEL 156 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 156 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Technical drawing — MODEL 156 3-WAY MULTI-PURPOSE DIN STYLE — MODEL 156 3-WAY MULTI-PURPOSE DIN STYLE

Technical drawing — MODEL 156 3-WAY MULTI-PURPOSE MOLDED WITH LEADS — MODEL 156 3-WAY MULTI-PURPOSE MOLDED WITH LEADS

Anodized Aluminum (Std.)

Series 15 Operators Conduit

Technical drawing — MODEL O156 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL O156 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 15 Operators DIN

Technical drawing — MODEL O156 3-WAY MULTI-PURPOSE DIN STYLE — MODEL O156 3-WAY MULTI-PURPOSE DIN STYLE

Series 15 Operators Molded Leads

Technical drawing — MODEL O156 3-WAY MULTI-PURPOSE MOLDED WITH LEADS — MODEL O156 3-WAY MULTI-PURPOSE MOLDED WITH LEADS

Series 50 Model 56

Read more about Series 50 Model 56

Our original mini — engineered for space economy without sacrificing performance. Typical applications include medical, analytical instrumentation. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Tough with options to use in hazardous location environments or low watt applications.
High quality engineering.

Valve specifications — Series 50 Model 56
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/8 NPT PORTS

125	125	1/32	1/32	.022	.020	56GG8XGM	56GG8XCM
100	100	3/64	3/64	.055	.048	56HH8XGM	56HH8XCM
65	50	1/16	1/16	.075	.075	56JJ8XGM	56JJ8XCM
25	25	3/32	3/32	.156	.150	56KK8XGM	56KK8XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (56JJ8XGM 120/60) repair pack (K56JDX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O56JJDXGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 6.0 Watts, DC — 7.0 Watts

Coil Construction

Molded and potted Class F. (Class H optional)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 0.38 lb Conduit Valve: 0.44 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers, Low Wattage, Spade Terminal Coil and Explosion Proof*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series 50 General Purpose Valves Conduit

Technical drawing — MODEL 56 1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 56
1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Technical drawing — MODEL 56 STUD MOUNT BODY 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 56
STUD MOUNT BODY 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 50 General Purpose Valves Grommet

Technical drawing — MODEL 56 1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS — MODEL 56
1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS

Technical drawing — MODEL 56 STUD MOUNT BODY 3-WAY MULTI-PURPOSE GROMMET WITH LEADS — MODEL 56
STUD MOUNT BODY 3-WAY MULTI-PURPOSE GROMMET WITH LEADS

Series 50 General Purpose Valves Yoke Leads

Technical drawing — MODEL 56 1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH LEADS — MODEL 56
1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH LEADS

Technical drawing — MODEL 56 STUD MOUNT BODY 3-WAY MULTI-PURPOSE YOKE WITH LEADS — MODEL 56
STUD MOUNT BODY 3-WAY MULTI-PURPOSE YOKE WITH LEADS

Series 50 General Purpose Valves Yoke Spades

Technical drawing — MODEL 56 1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL 56
1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 56 STUD MOUNT BODY 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL 56
STUD MOUNT BODY 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Stainless Steel (Std.), Brass (Opt.) or Aluminum (Opt.)

Series 30 Model 36

Read more about Series 30 Model 36

Complete range of valves particularly suitable when cost and size are major factors. The bodies are constructed of brass (stainless steel is optional). Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Brass body with stainless steel internal construction.
A smaller, cost effective alternative to any industry standard.

Valve specifications — Series 30 Model 36
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/8 NPT PORTS

300	300	1/32	1/32	.024	.024	36GG5XGM	36GG5XCM
150	150	3/64	3/64	.052	.052	36HH5XGM	36HH5XCM
75	75	1/16	1/16	.095	.095	36JJ5XGM	36JJ5XCM
50	30	3/32	3/32	.160	.160	36KK5XGM	36KK5XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (36HH5XCM 120/60) repair pack (K36HHX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O36HHDXCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.0 Watts DC — 8.0 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 0.75 lb Conduit Valve: 0.81 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 30 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 30 General Purpose Valves Conduit

Technical drawing — MODEL 36 1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 36
1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 30 General Purpose Valves DIN

Technical drawing — MODEL 36 1/8-27 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL 36
1/8-27 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL

Series 30 General Purpose Valves Grommet

Technical drawing — MODEL 36 1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS — MODEL 36
1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS

Series 30 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 36 1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET WITH LEADS — MODEL 36
1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET WITH LEADS

Series 30 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 36 1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL 36
1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Brass (Std.) or Stainless Steel (Opt.)

Series 20 Model 26

Read more about Series 20 Model 26

A complete line of valves with a great selection of options and exceptional proven performance. The standard in the field. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

The flagship valve initially created for the fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model 26
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING		VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400	400	1/32	1/32	.024	.024	26GG7XGM	26GG9ZGM	26GG7XCM	26GG9ZCM
150	150	3/64	3/64	.052	.052	26HH7XGM	26HH9ZGM	26HH7XCM	26HH9ZCM
100	100	1/16	1/16	.095	.095	26JJ7XGM	26JJ9ZGM	26JJ7XCM	26JJ9ZCM
75	75	3/32	3/32	.156	.156	26KK7XGM	26KK9ZGM	26KK7XCM	26KK9ZCM
35	35	1/8	1/8	.284	.201	26NN7XGM^	26NN9ZGM^	26NN7XCM^	26NN9ZCM^

^ VALVES WITH 1/8 N.O. ORIFICE ARE UL LISTED ONLY

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (26JJ9ZGM 120/60) repair pack (K26JJX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O26JJDZGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.7 Watts, DC — 9.5 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" and 1/4" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 1.13 lb Conduit Valve: 1.19 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil, European Style DIN, Explosion Proof and Magnetic Latching Coil, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102.*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 General Purpose Valves Conduit

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 26
METERING 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 20 General Purpose Valves DIN

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE DIN STYLE COIL

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL 26
METERING 3-WAY MULTI-PURPOSE DIN STYLE COIL

Series 20 General Purpose Valves Grommet

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE GROMMET HOUSING WITH LEADS — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE GROMMET HOUSING WITH LEADS

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE GROMMET HOUSING WITH LEADS — MODEL 26
METERING 3-WAY MULTI-PURPOSE GROMMET HOUSING WITH LEADS

Series 20 General Purpose Valves Yoke Leads

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE YOKE WITH LEADS — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE YOKE WITH LEADS

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH LEADS — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH LEADS

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE YOKE WITH LEADS — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE YOKE WITH LEADS

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE MOLDED COIL WITH YOKE — MODEL 26
METERING 3-WAY MULTI-PURPOSE MOLDED COIL WITH YOKE

Series 20 General Purpose Valves Yoke Spades

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL 26
METERING 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Series 20 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL 26
METERING 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Series 20 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 26 1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET WITH LEADS — MODEL 26
1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 26 1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET WITH LEADS — MODEL 26
1/8-27 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS — MODEL 26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS

Technical drawing — MODEL 26 METERING 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS — MODEL 26
METERING 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS

Stainless Steel (Std.) or Brass (Opt.)

Series 20 Operators Grommet

Technical drawing — MODEL O26 3-WAY MULT-PURPOSE GROMMET HOUSING WITH LEADS — MODEL O26 3-WAY MULT-PURPOSE GROMMET HOUSING WITH LEADS

Series 20 Operators Conduit

Technical drawing — MODEL O26 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL O26 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 20 Operators Conduit/Bracket Connection

Technical drawing — MODEL O26 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL O26 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Series 20 Operators DIN

Technical drawing — MODEL O26 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL O26 3-WAY MULTI-PURPOSE DIN STYLE COIL

Series 20 Operators Grommet/Bracket Connection

Technical drawing — MODEL O26 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS — MODEL O26 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS

Series 20 Operators Yoke Leads

Technical drawing — MODEL O26 3-WAY MULTI-PURPOSE MOLDED COIL WITH YOKE — MODEL O26 3-WAY MULTI-PURPOSE MOLDED COIL WITH YOKE

Series 20 Operators Yoke Spades

Technical drawing — MODEL O26 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS — MODEL O26 3-WAY MULTI-PURPOSE YOKE WITH SPADE TERMINALS

Series 70 Model 76

Read more about Series 70 Model 76

Super valves that have ratings that formerly required valves of much greater size. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Largest direct acting (non-piloted) valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model 76
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	1/4 NPT PORTS	1/4 NPT PORTS

225	225	1/16	1/16	.09	.09	76JJ9ZGM	76JJ9ZCM
150	150	3/32	3/32	.22	.22	76KK9ZGM	76KK9ZCM
100	100	1/8	1/8	.35	.35	76NN9ZGM	76NN9ZCM
75	75	5/32	5/32	.45	.45	76OO9ZGM	76OO9ZCM
60	60	3/16	3/16	.50	.50	76PP9ZGM	76PP9ZCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (76KK9ZGM 120/60) repair pack (K76KKX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O76KKDZGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Molded Class F (Std.), Potted and Class H Option

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*.

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 2.00 lb Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 70 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 70

Nomenclature Chart (non 58 series)

Series 70 3-WAY MULTI-PURPOSE DIN STYLE COIL

Technical drawing — MODEL 76 1/4-18 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL — MODEL 76
1/4-18 NPT 3-WAY MULTI-PURPOSE DIN STYLE COIL

Series 70 General Purpose Valves Conduit

Technical drawing — MODEL 76 1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL 76
1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 70 General Purpose Valves Grommet

Technical drawing — MODEL 76 1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS — MODEL 76
1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET WITH LEADS

Series 70 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 76 1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL 76
1/4-18 NPT 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Series 70 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 76 1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET CONNECTION — MODEL 76
1/4-18 NPT 3-WAY MULTI-PURPOSE GROMMET/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Series 70 Operators Conduit

Technical drawing — MODEL O76 3-WAY MULTI-PURPOSE CONDUIT CONNECTION — MODEL O76 3-WAY MULTI-PURPOSE CONDUIT CONNECTION

Series 70 Operators Conduit/Bracket Connection

Technical drawing — MODEL O76 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION — MODEL O76 3-WAY MULTI-PURPOSE CONDUIT/BRACKET CONNECTION

Series 70 Operators Grommet

Technical drawing — MODEL O76 3-WAY MULTI-PURPOSE GROMMET HOUSING WITH LEADS — MODEL O76 3-WAY MULTI-PURPOSE GROMMET HOUSING WITH LEADS

Series 70 Operators Grommet/Bracket Connection

Technical drawing — MODEL O76 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS — MODEL O76 3-WAY MULTI-PURPOSE GROMMET/BRACKET HOUSING WITH LEADS

Series E50 Model E56

Read more about Series E50 Model E56

PeterPaul explosion proof valves are used where fire or explosion hazards exist due to the presence of flammable gases or vapors, flammable liquids, combustible dust, or easily ignitable fibers. Hazardous Location valves are recommended, or in some cases compulsory, where a high level of protection from explosion is required.

Miniature Hazardous Location valve.
Flame-Proof construction.
High quality engineering.

Valve specifications — Series E50 Model E56
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER	IECEx/ATEX VALVE NUMBER
AC	DC	N.C.	N.O.	N.C.	N.O.	NORTH AMERICAN VALVE NUMBER	IECEx/ATEX VALVE NUMBER

125	125	1/32	1/32	.022	.020	E56GG8XCCM-∆	EA56GG8XCCM-∆
100	100	3/64	3/64	.055	.048	E56HH8XCCM-∆	EA56HH8XCCM-∆
65	50	1/16	1/16	.075	.075	E56JJ8XCCM-∆	EA56JJ8XCCM-∆
25	25	3/32	3/32	.156	.156	E56KK8XCCM-∆	EA56KK8XCCM-∆

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (E56KK8XCCM 120/60) repair pack (5KE56KK AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE56KKDXCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 5.6 Watts DC — 7.2 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Flame-Proof construction with 1/2" NPT conduit

Listings

Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D - Class II, Div 1, Groups E, F, and G; Div 2, Groups A, B, C, D, E, F, and G

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.65 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers, All Stainless Steel Construction*

Media

Air, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series E50 Hazardous Location Valves

Technical drawing — MODEL E56 1/8-27 NPT 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E56
1/8-27 NPT 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E56 10-32 PORTS 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E56
10-32 PORTS 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E56 BODY OPTION "E" 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E56
BODY OPTION "E" 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E56 BODY OPTION "O" 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E56
BODY OPTION "O" 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E56 BODY OPTION "R" 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E56
BODY OPTION "R" 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E56 METERED BODY 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E56
METERED BODY 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Stainless Steel (Std.)

Series 50 Operators Explosion Proof

Technical drawing — MODEL OE56 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL OE56 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Certification

North American

IECEx/ATEX

IECEx/ATEX Nomenclature

Coming soon.

Series 20 Model E26

Read more about Series 20 Model E26

Explosion Proof
The flagship valve initially created for the fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 1/4".

Valve specifications — Series 20 Model E26
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER		IECEx/ATEX VALVE NUMBER
AC	DC	N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400	400	1/32	1/32	.024	.024	E26GG7XCCM-∆	E26GG9ZCCM-∆	EA26GG7XCCM-∆	EA26GG9ZCCM-∆
150	150	3/64	3/64	.052	.052	E26HH7XCCM-∆	E26HH9ZCCM-∆	EA26HH7XCCM-∆	EA26HH9ZCCM-∆
100	100	1/16	1/16	.095	.095	E26JJ7XCCM-∆	E26JJ9ZCCM-∆	EA26JJ7XCCM-∆	EA26JJ9ZCCM-∆
75	75	3/32	3/32	.156	.156	E26KK7XCCM-∆	E26KK9ZCCM-∆	EA26KK7XCCM-∆	EA26KK9ZCCM-∆
35	35	1/8	1/8	.284	.277	E26NN7XCCM-∆ ^	E26NN9ZCCM-∆ ^	EA26NN7XCCM-∆ ^	EA26NN9ZCCM-∆ ^

^ VALVES WITH 1/8 ORIFICE ARE NOT UL OR CSA RATED

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (E26NK9ZCCM 120/60) repair pack (2KE26NK AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE26NKDZCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 7.3 Watts, DC — 9.5 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" and 1/4" NPT (other ports available).

Housing

Flame-Proof construction with 1/2" NPT conduit

Listings

Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.50 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102*

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 Hazardous Location Valves

Technical drawing — MODEL E26 1/4-18 NPT 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E26
1/4-18 NPT 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E26 1/8-27 NPT 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E26
1/8-27 NPT 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Technical drawing — MODEL E26 MANUAL OVERRIDE 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL E26
MANUAL OVERRIDE 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Stainless Steel (Std.)

Series 20 Operators Explosion Proof

Technical drawing — MODEL OE26 3-WAY MULTI-PURPOSE EXPLOSION PROOF — MODEL OE26 3-WAY MULTI-PURPOSE EXPLOSION PROOF

Certification

North American

IECEx/ATEX

IECEx/ATEX Nomenclature

Coming soon.

Series 70 Model N71

Read more about Series 70 Model N71

The N70 line PeterPaul Hazardous Location valves are UL listed and certified for non-incendive Hazardous Locations — Class I, Div 2, Groups A, B, C and D; Class II, Div 2, Groups E, F and G; T3C temperature rating.

Largest direct acting non-piloted valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model N71
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE	CV FACTOR	NORTH AMERICAN VALVE NUMBER CONDUIT HOUSING
AC	DC	ORIFICE SIZE	CV FACTOR	1/4 NPT PORTS

350	350	1/16	.09	N71J9ZCP
250	250	3/32	.22	N71K9ZCP
175	175	1/8	.35	N71N9ZCP
125	125	5/32	.45	N71O9ZCP
100	100	3/16	.50	N71P9ZCP

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (N71P9ZCP 120/60) repair pack (KN71PDX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (ON71PDZCP 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Potted Class F. (Class H optional)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers * Consult representative or factory for options and specifications.

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 70

Nomenclature Chart (non 58 series)

Series 70 HAZARDOUS LOCATION VALVES

Technical drawing — MODEL N71 1/4-18 NPT 2WNO CONDUIT CONNECTION — MODEL N71
1/4-18 NPT 2WNO CONDUIT CONNECTION

Technical drawing — MODEL N71 1/4-18 NPT 2WNO CONDUIT/BRACKET CONNECTION — MODEL N71
1/4-18 NPT 2WNO CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Certification

North American

Series 70 Model N72

Read more about Series 70 Model N72

Largest direct acting non-piloted valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model N72
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE	CV FACTOR	NORTH AMERICAN VALVE NUMBER CONDUIT HOUSING
AC	DC	ORIFICE SIZE	CV FACTOR	1/4 NPT PORTS

500	500	3/32	.22	N72K9DCP
300	300	1/8	.35	N72N9DCP
225	225	5/32	.45	N72O9DCP
140	140	3/16	.55	N72P9DCP
100	100	1/4	.78	N72R9DCP

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (N72R9DCP 120/60) repair pack (KN72RDD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (ON72RDDCP 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Potted Class F. (Class H optional)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers * Consult representative or factory for options and specifications.

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 70

Nomenclature Chart (non 58 series)

Series 70 HAZARDOUS LOCATION VALVES

Technical drawing — MODEL N72 1/4-18 NPT 2WNC CONDUIT CONNECTION — MODEL N72
1/4-18 NPT 2WNC CONDUIT CONNECTION

Technical drawing — MODEL N72 1/4-18 NPT 2WNC CONDUIT/BRACKET CONNECTION — MODEL N72
1/4-18 NPT 2WNC CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Certification

North American

Subscribe to