| PeterPaul

Series 15 Model 153 - Exhaust to Atmosphere

Read more about Series 15 Model 153 - Exhaust to Atmosphere

The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas and liquid media at pressures from vacuum to 200 psi — depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.

Small, lightweight and economical.
Operating pressures from vacuum to 200 psi.
Quality design and construction.

Valve specifications — Series 15 Model 153
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING
AC	DC	INLET	EXH	INLET	EXH	VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING

200	200	1/32	1/32	.022	.020	153GG2DGM	153GG2DEM	153GG2DCM
150	150	3/64	3/64	.055	.048	153HH2DGM	153HH2DEM	153HH2DCM
150	150	3/64	1/16	.055	.075	153HJ2DGM	153HJ2DEM	153HJ2DCM
100	100	1/16	1/16	.075	.075	153JJ2DGM	153JJ2DEM	153JJ2DCM
60	60	3/32	1/16	.130	.075	153KJ2DGM	153KJ2DEM	153KJ2DCM
50	50	3/32	3/32	.130	.130	153KK2DGM	153KK2DEM	153KK2DCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (153JJ2DGM 120/60) repair pack (K153JD AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O153JJDDGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.5 Watts, DC — 10.5 Watts

Coil Construction

Molded Class F. (155°C)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Leadwires, 1/2” NPT Conduit and DIN Style Connector.

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.27 lb to 0.30 lb depending on model and housing style

Repair Packs

See table above.

Options

Round Brass or Stainless Steel Body, Stackable Construction, Alternate Elastomers and Magnetic Latching Coil. Female DIN Style Connector Part Number 50-17029.*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 15 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 15 General Purpose Valves

Technical drawing — MODEL 153 3-WAY EXHAUST TO ATMOSPHERE CONDUIT CONNECTION — MODEL 153 3-WAY EXHAUST TO ATMOSPHERE CONDUIT CONNECTION

Technical drawing — MODEL 153 3-WAY EXHAUST TO ATMOSPHERE DIN STYLE — MODEL 153 3-WAY EXHAUST TO ATMOSPHERE DIN STYLE

Technical drawing — MODEL 153 3-WAY EXHAUST TO ATMOSPHERE MOLDED WITH LEADS — MODEL 153 3-WAY EXHAUST TO ATMOSPHERE MOLDED WITH LEADS

Anodized Aluminum (Std.)

Series 15 Operators Conduit

Technical drawing — MODEL O153 3-WAY EXHAUST TO ATMOSPHERE CONDUIT CONNECTION — MODEL O153 3-WAY EXHAUST TO ATMOSPHERE CONDUIT CONNECTION

Series 15 Operators DIN

Technical drawing — MODEL O153 3-WAY EXHAUST TO ATMOSPHERE DIN STYLE — MODEL O153 3-WAY EXHAUST TO ATMOSPHERE DIN STYLE

Series 15 Operators Molded Leads

Technical drawing — MODEL O153 3-WAY EXHAUST TO ATMOSPHERE MOLDED WITH LEADS — MODEL O153 3-WAY EXHAUST TO ATMOSPHERE MOLDED WITH LEADS

Series 50 Model 53 - Piped Exhaust

Read more about Series 50 Model 53 - Piped Exhaust

Series 50 Model 53 - Piped Exhaust solenoid operator

Our original mini — engineered for space economy without sacrificing performance. Typical applications include medical, analytical instrumentation. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Tough with options to use in hazardous location environments or low watt applications.
High quality engineering.

Valve specifications — Series 50 Model 53
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	INLET	EXH	INLET	EXH	1/8 NPT PORTS	1/8 NPT PORTS

200	200	1/32	1/32	.022	.020	53GG8XGM	53GG8XCM
150	150	3/64	3/64	.055	.048	53HH8XGM	53HH8XCM
150	150	3/64	1/16	.055	.075	53HJ8XGM	53HJ8XCM
100	100	1/16	1/16	.075	.075	53JJ8XGM	53JJ8XCM
60	60	3/32	1/16	.156	.075	53KJ8XGM	53KJ8XCM
50	50	3/32	3/32	.156	.150	53KK8XGM	53KK8XCM
30	30	1/8	1/16	.230	.075	53NJ8XGM	53NJ8XCM
30	30	1/8	3/32	.230	.150	53NK8XGM	53NK8XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (53JJ8XGM 120/60) repair pack (K53JJX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O53JJDXGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 6.0 Watts, DC — 7.0 Watts

Coil Construction

Molded and potted Class F. (Class H optional)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" NPT (other ports available).*

Housing

Grommet and 1/2″ NPT conduit – many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 0.38 lb Conduit Valve: 0.44 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers, Low Wattage, Spade Terminal Coil and Explosion Proof

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series 50 General Purpose Valves Conduit

Technical drawing — MODEL 53 1/8-27 NPT 3WNC PIPED EXHAUST CONDUIT CONNECTION — MODEL 53
1/8-27 NPT 3WNC PIPED EXHAUST CONDUIT CONNECTION

Technical drawing — MODEL 53 10-32 PORTS 3WNC PIPED EXHAUST CONDUIT CONNECTION — MODEL 53
10-32 PORTS 3WNC PIPED EXHAUST CONDUIT CONNECTION

Technical drawing — MODEL 53 STUD MOUNT BODY 3WNC PIPED EXHAUST CONDUIT CONNECTION — MODEL 53
STUD MOUNT BODY 3WNC PIPED EXHAUST CONDUIT CONNECTION

Series 50 General Purpose Valves Grommet

Technical drawing — MODEL 53 1/8-27 NPT 3WNC PIPED EXHAUST GROMMET WITH LEADS — MODEL 53
1/8-27 NPT 3WNC PIPED EXHAUST GROMMET WITH LEADS

Technical drawing — MODEL 53 10-32 PORTS 3WNC PIPED EXHAUST GROMMET WITH LEADS — MODEL 53
10-32 PORTS 3WNC PIPED EXHAUST GROMMET WITH LEADS

Technical drawing — MODEL 53 STUD MOUNT BODY 3WNC PIPED EXHAUST GROMMET WITH LEADS — MODEL 53
STUD MOUNT BODY 3WNC PIPED EXHAUST GROMMET WITH LEADS

Series 50 General Purpose Valves Yoke Leads

Technical drawing — MODEL 53 1/8-27 NPT 3WNC PIPED EXHAUST YOKE WITH LEADS — MODEL 53
1/8-27 NPT 3WNC PIPED EXHAUST YOKE WITH LEADS

Technical drawing — MODEL 53 10-32 PORTS 3WNC PIPED EXHAUST YOKE WITH LEADS — MODEL 53
10-32 PORTS 3WNC PIPED EXHAUST YOKE WITH LEADS

Technical drawing — MODEL 53 STUD MOUNT BODY 3WNC PIPED EXHAUST YOKE WITH LEADS — MODEL 53
STUD MOUNT BODY 3WNC PIPED EXHAUST YOKE WITH LEADS

Series 50 General Purpose Valves Yoke Spades

Technical drawing — MODEL 53 1/8-27 NPT 3WNC PIPED EXHAUST YOKE WITH SPADE TERMINALS — MODEL 53
1/8-27 NPT 3WNC PIPED EXHAUST YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 53 10-32 PORTS 3WNC PIPED EXHAUST YOKE WITH SPADE TERMINALS — MODEL 53
10-32 PORTS 3WNC PIPED EXHAUST YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 53 STUD MOUNT BODY 3WNC PIPED EXHAUST YOKE WITH SPADE TERMINALS — MODEL 53
STUD MOUNT BODY 3WNC PIPED EXHAUST YOKE WITH SPADE TERMINALS

SERIES 50 STACKING BODIES COMMON OUTLET CONDUIT CONNECTION PIPED EXHAUST

Technical drawing — MODEL 53 3WNC STACKING BODIES COMMON OUTLET CONDUIT CONNECTION PIPED EXHAUST — MODEL 53 3WNC STACKING BODIES COMMON OUTLET CONDUIT CONNECTION PIPED EXHAUST

Series 50 STACKING BODIES COMMON OUTLET GROMMET WITH LEADS PIPED EXHAUST

Technical drawing — MODEL 53 3WNC STACKING BODIES COMMON OUTLET GROMMET WITH LEADS PIPED EXHAUST — MODEL 53 3WNC STACKING BODIES COMMON OUTLET GROMMET WITH LEADS PIPED EXHAUST

SERIES 50 STACKING BODIES COMMON OUTLET SPADE COIL WITH YOKE PIPED EXHAUST

Technical drawing — MODEL 53 3WNC STACKING BODIES COMMON OUTLET YOKE WITH SPADE TERMINALS PIPED EXHAUST — MODEL 53 3WNC STACKING BODIES COMMON OUTLET YOKE WITH SPADE TERMINALS PIPED EXHAUST

Stainless Steel (Std.), Brass (Opt.) or Aluminum (Opt.)

Series 50ELW Model ELW53 - Exhaust to Atmosphere

Read more about Series 50ELW Model ELW53 - Exhaust to Atmosphere

A UL and CSA listed, low watt, miniature hazardous location valve with minimal space and energy requirements in volatile environments. Air and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials.

Smallest hazardous location solenoid valve.
Best ambient and high temperature ratings on the market.
NEMA 4 rating is standard with encapsulated coil.
High quality engineering.

Valve specifications — Series 50 ELW Model ELW53
MAX. OPER. PRESS. DIFF.				ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER
GAS		LIQUID		ORIFICE SIZE		CV FACTOR
AC	DC	AC	DC	N.C.	N.O.	N.C.	N.O.

215	135	215	135	1/32	1/32	.022	.020	ELW53GG8DCCP
215	120	120	65	1/32	3/64	.022	.048	ELW53GH8DCCP
135	50	40	30	1/32	1/16	.022	.075	ELW53GJ8DCCP
70	35	30	20	1/32	1/16	.022	.134	ELW53GV8DCCP
55	30	25	15	1/32	3/32	.022	.150	ELW53GK8DCCP
120	70	120	65	3/64	3/64	.055	.048	ELW53HH8DCCP
120	50	40	30	3/64	1/16	.055	.075	ELW53HJ8DCCP
70	35	30	20	3/64	1/16	.055	.134	ELW53HV8DCCP
55	30	25	15	3/64	3/32	.055	.150	ELW53HK8DCCP
85	40	40	30	1/16	1/16	.075	.075	ELW53JJ8DCCP
70	35	30	20	1/16	1/16	.075	.134	ELW53JV8DCCP
55	30	25	15	1/16	3/32	.075	.150	ELW53JK8DCCP
50	30	30	20	5/64	1/16	.134	.134	ELW53VV8DCCP
50	30	25	15	5/64	3/32	.134	.150	ELW53VK8DCCP
35	20	25	15	5/64	3/32	.156	.150	ELW53KK8DCCP

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (ELW53JJ8DCCP 120/60) repair pack (KELW53JJDL AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OELW53JJDDCCP 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 1.8 Watts DC — 1.8 Watts

Coil Construction

Encapsulated Class F Coil with third wire ground

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Encapsulated with 1/2 NPT conduit

Listings

Valves are UL listed for Hazardous Locations — Class I, Div 1, Groups A, B, C, and D – Class II, Div 1, Groups E, F, and G; Div 2, Groups A, B, C, D, E, F, and G. “T” Rating as low as T5.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.60 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers and All Stainless Steel Construction*

Media

Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 140°F (60°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series 50 ELW Encapsulated Low Watt Valves

Technical drawing — MODEL ELW53 1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL ELW53
1/8-27 NPT 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL ELW53 10-32 BODY PORTS 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL ELW53
10-32 BODY PORTS 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL ELW53 BODY OPTION "E" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL ELW53
BODY OPTION "E" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL ELW53 BODY OPTION "O" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL ELW53
BODY OPTION "O" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL ELW53 BODY OPTION "R" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL ELW53
BODY OPTION "R" 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Technical drawing — MODEL ELW53 METERED BODY 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL ELW53
METERED BODY 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Stainless Steel (Std.)

Series 50 Operators Explosion Proof

Technical drawing — MODEL OELW53 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF — MODEL OELW53 3WNC EXHAUST TO ATMOSPHERE EXPLOSION PROOF

Certification

North American

Series 20 Model MLV23 (REVERSE POLARITY) - Piped Exhaust

Read more about Series 20 Model MLV23 (REVERSE POLARITY) - Piped Exhaust

Series 20 Model MLV23 (REVERSE POLARITY) - Piped Exhaust solenoid operator

DIN coil (2 terminals with ground) wiring diagram

Series 20 Model MLV23 (REVERSE POLARITY) - Piped Exhaust flow diagram

3-Way Reverse Polarity Magnet Latching Valve — Piped Exhaust - This type of valve is often used in remote areas where continuous power may not be available or with battery-powered portable equipment where power capacity is limited, as it only uses power during latching and un-latching. It is also valuable in equipment where coil heating, due to continuous application of power, is undesirable. Air and other fluids are compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials.

Neutral (−) a. Pulse Yellow lead to Positive (+) to latch b. Pulse Blue lead to Positive (+) to un-latch

Positive (+) a. Pulse Yellow lead to Neutral (−) to un-latch b. Pulse Blue lead to Neutral (−) to latch

Valve specifications — Series 20 Model MLV23 (REVERSE POLARITY) - Piped Exhaust
MAX. OPER.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER DIN COIL (2 TERMINALS WITH GROUND)		VALVE NUMBER 2 WIRE COIL
PRESS. DIFF.	ORIFICE SIZE		CV FACTOR		VALVE NUMBER DIN COIL (2 TERMINALS WITH GROUND)		VALVE NUMBER 2 WIRE COIL
DC	INLET	EXH	INLET	EXH	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400	1/32	1/32	.024	.024	23GG7XELM-∆	23GG9ZELM-∆	23GG7XGLM-∆	23GG9ZGLM-∆
150	3/64	1/16	.052	.095	23HJ7XELM-∆	23HJ9ZELM-∆	23HJ7XGLM-∆	23HJ9ZGLM-∆
100	1/16	1/16	.095	.095	23JJ7XELM-∆	23JJ9ZELM-∆	23JJ7XGLM-∆	23JJ9ZGLM-∆
100	1/16	3/32	.095	.156	23JK7XELM-∆	23JK9ZELM-∆	23JK7XGLM-∆	23JK9ZGLM-∆
75	3/32	3/32	.156	.156	23KK7XELM-∆	23KK9ZELM-∆	23KK7XGLM-∆	23KK9ZGLM-∆
50	1/8	3/32	.214	.156	23NK7XELM-∆	23NK9ZELM-∆	23NK7XGLM-∆	23NK9ZGLM-∆
20	3/16	3/32	.500	.156	23PK7XELM-∆	23PK9ZELM-∆	23PK7XGLM-∆	23PK9ZGLM-∆

* FKM seals not recommended for pressures of 500 psi and above.

Ordering Information:

Seal Material: Replace ∆ with desired code -Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (23JJ7XELM 12/DC) repair pack (K23JJXJ DC)

Coil Voltage

12, 24/DC

Nominal Power

DC — 10.0 Watts

Coil Construction

Molded Class B with DIN 43650 Form A Connector (Std.), Leadwires (Opt.) For your convenience we have the female DIN style mating connector No. 20-198** available for an additional fee.*

Typical Response Time on Air

Approximate 50 millisecond pulse to energize and de-energize.

Operating Speed

Up to 600 CPM

Internal Components

Stainless Steel

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8” and 1/4” NPT (other ports available).*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.2 lb average

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102* * Consult representative or factory for options and specifications.

Media

Air and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many other media require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series MLV20 Model 23 Magnetic Latching (Reverse Polarity) — Piped Exhaust

Technical drawing — MODEL 23 1/4-18 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL — MODEL 23
1/4-18 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL

Technical drawing — MODEL 23 1/8-27 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL — MODEL 23
1/8-27 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL

Technical drawing — MODEL 23 BODY OPTION "E" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL — MODEL 23
BODY OPTION "E" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL

Technical drawing — MODEL 23 BODY OPTION "O" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL — MODEL 23
BODY OPTION "O" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL

Technical drawing — MODEL 23 BODY OPTION "R" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL — MODEL 23
BODY OPTION "R" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL

Technical drawing — MODEL 23 METERING 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL — MODEL 23
METERING 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL

Technical drawing — MODEL 23 1/4-18 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL 23
1/4-18 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 23 1/8-27 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL 23
1/8-27 NPT 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 23 BODY OPTION "E" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL 23
BODY OPTION "E" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 23 BODY OPTION "O" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL 23
BODY OPTION "O" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 23 BODY OPTION "R" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL 23
BODY OPTION "R" 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Technical drawing — MODEL 23 METERING 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL 23
METERING 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Stainless Steel (Std.) or Brass (Opt.)

Series 20 Operators Latching Leads

Technical drawing — MODEL O23 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS — MODEL O23 3WNC PIPED EXHAUST MAGNETIC LATCHING COIL WITH LEADS

Series 70 Model 74

Read more about Series 70 Model 74

Super valves that have ratings that formerly required valves of much greater size. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials.

Largest direct acting (non-piloted) valve we manufacture.
Large orifice.
High flow.
Will operate effectively at very low pressures or vacuum.

Valve specifications — Series 70 Model 74
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING	VALVE NUMBER CONDUIT HOUSING
AC	DC	INLET	EXH	INLET	EXH	1/4 NPT PORTS	1/4 NPT PORTS

350	350	1/16	1/16	.09	.09	74JJ9ZGM	74JJ9ZCM
250	250	3/32	3/32	.22	.22	74KK9ZGM	74KK9ZCM
175	175	1/8	1/8	.35	.35	74NN9ZGM	74NN9ZCM
125	125	5/32	5/32	.45	.45	74OO9ZGM	74OO9ZCM
100	100	3/16	3/16	.50	.50	74PP9ZGM	74PP9ZCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (74PP9ZGM 120/60) repair pack (K74PPX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O74PPDZGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 18.0 Watts DC — 16.0 Watts

Coil Construction

Molded Class F (Std.), Potted and Class H Option

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/4" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 2.00 lb Conduit Valve: 2.06 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering and Alternate Elastomers

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 70 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

4000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 70

Nomenclature Chart (non 58 series)

Series 70 3WNO DIN STYLE COIL

Technical drawing — MODEL 74 1/4-18 NPT 3WNO DIN STYLE COIL — MODEL 74
1/4-18 NPT 3WNO DIN STYLE COIL

Series 70 General Purpose Valves Conduit

Technical drawing — MODEL 74 1/4-18 NPT 3WNO CONDUIT CONNECTION — MODEL 74
1/4-18 NPT 3WNO CONDUIT CONNECTION

Series 70 General Purpose Valves Grommet

Technical drawing — MODEL 74 1/4-18 NPT 3WNO GROMMET WITH LEADS — MODEL 74
1/4-18 NPT 3WNO GROMMET WITH LEADS

Series 70 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 74 1/4-18 NPT 3WNO GROMMET/BRACKET CONNECTION — MODEL 74
1/4-18 NPT 3WNO GROMMET/BRACKET CONNECTION

Series 70 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 74 1/4-18 NPT 3WNO CONDUIT/BRACKET CONNECTION — MODEL 74
1/4-18 NPT 3WNO CONDUIT/BRACKET CONNECTION

Stainless Steel (Std.) or Brass (Opt.)

Series 70 Operators Conduit

Technical drawing — MODEL O74 3WNO CONDUIT CONNECTION — MODEL O74 3WNO CONDUIT CONNECTION

Series 70 Operators Conduit/Bracket Connection

Technical drawing — MODEL O74 3WNO CONDUIT/BRACKET CONNECTION — MODEL O74 3WNO CONDUIT/BRACKET CONNECTION

Series 70 Operators Grommet

Technical drawing — MODEL O74 3WNO GROMMET HOUSING WITH LEADS — MODEL O74 3WNO GROMMET HOUSING WITH LEADS

Series 70 Operators Grommet/Bracket Connection

Technical drawing — MODEL O74 3WNO GROMMET/BRACKET HOUSING WITH LEADS — MODEL O74 3WNO GROMMET/BRACKET HOUSING WITH LEADS

Series E50 Model E54

Read more about Series E50 Model E54

PeterPaul explosion proof valves are used where fire or explosion hazards exist due to the presence of flammable gases or vapors, flammable liquids, combustible dust, or easily ignitable fibers. Hazardous Location valves are recommended, or in some cases compulsory, where a high level of protection from explosion is required.

Miniature Hazardous Location valve.
Flame-Proof construction.
High quality engineering.

Valve specifications — Series E50 Model E54
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER	IECEx/ATEX VALVE NUMBER
AC	DC	INLET	EXH	INLET	EXH	NORTH AMERICAN VALVE NUMBER	IECEx/ATEX VALVE NUMBER

150	150	1/32	1/32	.020	.022	E54GG8XCCM-∆	EA54GG8XCCM-∆
125	125	3/64	3/64	.048	.055	E54HH8XCCM-∆	EA54HH8XCCM-∆
100	75	1/16	1/16	.075	.075	E54JJ8XCCM-∆	EA54JJ8XCCM-∆
75	45	1/16	3/32	.075	.156	E54JK8XCCM-∆	EA54JK8XCCM-∆
50	50	3/32	3/32	.156	.156	E54KK8XCCM-∆	EA54KK8XCCM-∆
50	30	1/16	1/8	.075	.230	E54NJ8XCCM-∆	EA54NJ8XCCM-∆
40	25	3/32	1/8	.156	.230	E54NK8XCCM-∆	EA54NK8XCCM-∆

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (E54JK8XCCM 120/60) repair pack (5KE54JK AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE54JKDXCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 5.6 Watts DC — 7.2 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Listings

Valves are UL listed and CSA certified for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Groups E, F, and G; Div 2, Groups C, D, E, F, and G

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.40 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Alternate Elastomers, All Stainless Steel Construction*

Media

Air, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, oils, some hydraulic fluids, and many media require special seal materials. (Series 50 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 40-50

Nomenclature Chart (non 58 series)

Series E50 Hazardous Locations Valves

Technical drawing — MODEL E54 1/8-27 NPT 3WNO EXPLOSION PROOF — MODEL E54
1/8-27 NPT 3WNO EXPLOSION PROOF

Technical drawing — MODEL E54 10-32 PORTS 3WNO EXPLOSION PROOF — MODEL E54
10-32 PORTS 3WNO EXPLOSION PROOF

Technical drawing — MODEL E54 BODY OPTION "E" 3WNO EXPLOSION PROOF — MODEL E54
BODY OPTION "E" 3WNO EXPLOSION PROOF

Technical drawing — MODEL E54 BODY OPTION "O" 3WNO EXPLOSION PROOF — MODEL E54
BODY OPTION "O" 3WNO EXPLOSION PROOF

Technical drawing — MODEL E54 BODY OPTION "R" 3WNO EXPLOSION PROOF — MODEL E54
BODY OPTION "R" 3WNO EXPLOSION PROOF

Technical drawing — MODEL E54 METERED BODY 3WNO EXPLOSION PROOF — MODEL E54
METERED BODY 3WNO EXPLOSION PROOF

Stainless Steel (Std.)

Series 50 Operators Explosion Proof

Technical drawing — MODEL OE54 3WNO EXPLOSION PROOF — MODEL OE54 3WNO EXPLOSION PROOF

Certification

North American

IECEx/ATEX

IECEx/ATEX Nomenclature

Coming soon.

Series 20 Model E24

Read more about Series 20 Model E24

Explosion Proof
The flagship valve initially created for the fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model E24
+ MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER		IECEx/ATEX VALVE NUMBER
AC	DC	INLET	EXH	INLET	EXH	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

400	400	1/32	1/32	.024	.024	E24GG7XCCM-∆	E24GG9ZCCM-∆	EA24GG7XCCM-∆	EA24GG9ZCCM-∆
150 (225)	150	3/64	1/16	.052	.095	E24HJ7XCCM-∆	E24HJ9ZCCM-∆	EA24HJ7XCCM-∆	EA24HJ9ZCCM-∆
100 (150)	100	1/16	1/16	.095	.095	E24JJ7XCCM-∆	E24JJ9ZCCM-∆	EA24JJ7XCCM-∆	EA24JJ9ZCCM-∆
100 (125)	100	1/16	1/8	.095	.284	E24JN7XCCM-∆	E24JN9ZCCM-∆	EA24JN7XCCM-∆	EA24JN9ZCCM-∆
75 (90)	75	3/32	1/8	.156	.284	E24KN7XCCM-∆	E24KN9ZCCM-∆	EA24KN7XCCM-∆	EA24KN9ZCCM-∆
30	30	1/8	1/8	.227	.284	E24NN7XCCM-∆^	E24NN9ZCCM-∆^	EA24NN7XCCM-∆^	EA24NN9ZCCM-∆^

^ VALVES WITH 1/8 ORIFICE ARE NOT UL OR CSA LISTED
+ Ratings in brackets are optional extended ratings; consult factory

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (E24KN9ZCCM 120/60) repair pack (2KE24K AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE24KNDZCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 7.3 Watts DC — 9.5 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" and 1/4" NPT (other ports available).

Housing

Flame-Proof construction with 1/2″ NPT conduit

Listings

Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.50 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102*

Media

Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. (Series 20 pressure ratings may change due to the viscosity of the liquid.)*

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 Hazardous Location Valves

Technical drawing — MODEL E24 1/4-18 NPT 3-WAY NORMALLY OPEN EXPLOSION PROOF — MODEL E24
1/4-18 NPT 3-WAY NORMALLY OPEN EXPLOSION PROOF

Technical drawing — MODEL E24 1/8-27 NPT 3-WAY NORMALLY OPEN EXPLOSION PROOF — MODEL E24
1/8-27 NPT 3-WAY NORMALLY OPEN EXPLOSION PROOF

Technical drawing — MODEL E24 MANUAL OVERRIDE 3-WAY NORMALLY OPEN EXPLOSION PROOF — MODEL E24
MANUAL OVERRIDE 3-WAY NORMALLY OPEN EXPLOSION PROOF

Technical drawing — MODEL E24 METERING 3-WAY NORMALLY OPEN EXPLOSION PROOF — MODEL E24
METERING 3-WAY NORMALLY OPEN EXPLOSION PROOF

Stainless Steel (Std.)

Series 20 Operators Explosion Proof

Technical drawing — MODEL OE24 3-WAY NORMALLY OPEN EXPLOSION PROOF — MODEL OE24 3-WAY NORMALLY OPEN EXPLOSION PROOF

Certification

North American

IECEx/ATEX

IECEx/ATEX Nomenclature

Coming soon.

Series 15 Model 155

Read more about Series 15 Model 155

The little black box — magnetic components encased in epoxy for durability and reliability. Interior parts are stainless steel and anodized aluminum. The valves may be used with air, inert gas and liquid media at pressures from vacuum to 300 psi AC, 200 psi DC — depending upon orifice size and configuration. For those who require extra heat resistance and media compatibility, FKM and other elastomers are available.

Small, lightweight and economical.
Operating pressures from vacuum to 300 psi AC, 200 psi DC.
Quality design and construction.

Valve specifications — Series 15 Model 155
MAX. OPER. PRESS. DIFF.		ORIFICE SIZE		CV FACTOR		VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING
AC	DC	N.C.	N.O.	N.C.	N.O.	VALVE NUMBER LEAD WIRE	VALVE NUMBER DIN STYLE	VALVE NUMBER CONDUIT HOUSING

300	200	1/32	1/32	.022	.020	155GG2XGM	155GG2XEM	155GG2XCM
200	150	3/64	3/64	.055	.048	155HH2XGM	155HH2XEM	155HH2XCM
100	75	1/16	1/16	.075	.075	155JJ2XGM	155JJ2XEM	155JJ2XCM
75	40	3/32	1/16	.130	.075	155KJ2XGM	155KJ2XEM	155KJ2XCM
75	40	3/32	3/32	.130	.130	155KK2XGM	155KK2XEM	155KK2XCM

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (155HH2XGM 120/60) repair pack (K155HX AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O155HHDXGM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.5 Watts, DC — 10.5 Watts

Coil Construction

Molded Class F. (155°C)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" NPT (Std.)

Housing

Leadwires, 1/2” NPT Conduit and DIN Style Connector.

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

0.27 lb to 0.30 lb depending on model and housing style.

Repair Packs

See table above.

Options

Round Brass or Stainless Steel Body, Stackable Construction, Alternate Elastomers and Magnetic Latching Coil. Female DIN Style Connector Part Number 50-17029.*

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Nomenclature Chart (non 58 series)

Series 15 General Purpose Valves

Technical drawing — MODEL 155 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL 155 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Technical drawing — MODEL 155 3-WAY DIRECTIONAL CONTROL DIN STYLE — MODEL 155 3-WAY DIRECTIONAL CONTROL DIN STYLE

Technical drawing — MODEL 155 3-WAY DIRECTIONAL CONTROL MOLDED LEADS — MODEL 155 3-WAY DIRECTIONAL CONTROL MOLDED LEADS

Anodized Aluminum (Std.)

Series 15 Operators Conduit

Technical drawing — MODEL O155 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL O155 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Series 15 Operators DIN

Technical drawing — MODEL O155 3-WAY DIRECTIONAL CONTROL DIN STYLE — MODEL O155 3-WAY DIRECTIONAL CONTROL DIN STYLE

Series 15 Operators Molded Leads

Technical drawing — MODEL O155 3-WAY DIRECTIONAL CONTROL MOLDED LEADS — MODEL O155 3-WAY DIRECTIONAL CONTROL MOLDED LEADS

Series 20 Model 25

Read more about Series 20 Model 25

A complete line of valves with a great selection of options and exceptional proven performance. The standard in the field. Air, water, and other fluids compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special seal materials. The flagship valve initially created for the fluid power industry. Heavy duty and made of stainless steel. A real workhorse with proven performance. It has the greatest amount of options available of all the valves. Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model 25
+ MAX. OPER. PRESS. DIFF.				ORIFICE SIZE		CV FACTOR		VALVE NUMBER GROMMET HOUSING		VALVE NUMBER CONDUIT HOUSING
AC		DC		N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

500		500		1/32	1/32	.024	.024	25GG7XGM	25GG9ZGM	25GG7XCM	25GG9ZCM
235	(400)	235	(300)	3/64	3/64	.052	.052	25HH7XGM	25HH9ZGM	25HH7XCM	25HH9ZCM
200	(225)	200	(200)	1/16	3/64	.095	.052	25JH7XGM	25JH9ZGM	25JH7XCM	25JH9ZCM
150	(225)	150	(200)	1/16	1/16	.095	.095	25JJ7XGM	25JJ9ZGM	25JJ7XCM	25JJ9ZCM
100	(150)	100	(125)	3/32	3/32	.156	.156	25KK7XGM	25KK9ZGM	25KK7XCM	25KK9ZCM
100	(125)	100		1/8	3/32	.284	.156	25NK7XGM	25NK9ZGM	25NK7XCM	25NK9ZCM
30	(40)	35	(40)	1/8	1/8	.284	.201	25NN7XGM^	25NN9ZGM^	25NN7XCM^	25NN9ZCM^

Ordering Information:

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (25JJ7XGM 12/DC) repair pack (K25JJX DC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (O25JJDXGM 12/DC)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 8.7 Watts DC — 9.5 Watts

Coil Construction

Molded (Std.), Non-molded Class A and Potted Class F or Class H (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

Standard 1/8" and 1/4" NPT (other ports available).*

Housing

Grommet and 1/2" NPT conduit - many options available.*

Listings

Most valves are UL and CSA listed.*

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

Grommet Valve: 1.13 lb Conduit Valve: 1.19 lb

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Spade Terminal Coil, European Style DIN, Explosion Proof and Magnetic Latching Coil, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102*

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 General Purpose Valves Conduit

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Series 20 General Purpose Valves DIN

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL

Series 20 General Purpose Valves Grommet

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL GROMMET WITH LEADS — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL GROMMET WITH LEADS

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL GROMMET WITH LEADS — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL GROMMET WITH LEADS

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL GROMMET HOUSING WITH LEADS — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL GROMMET HOUSING WITH LEADS

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL GROMMET HOUSING WITH LEADS — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL GROMMET HOUSING WITH LEADS

Series 20 General Purpose Valves Yoke Leads

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS

Technical drawing — MODEL 25 BODY OPTION "E" 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH LEADS — MODEL 25
BODY OPTION "E" 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH LEADS

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL YOKE WITH LEADS

Series 20 General Purpose Valves Yoke Spades

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS

Series 20 General Purpose Valves Conduit/Bracket Connection

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION

Series 20 General Purpose Valves Grommet/Bracket Connection

Technical drawing — MODEL 25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET WITH LEADS — MODEL 25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET WITH LEADS — MODEL 25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET WITH LEADS

Technical drawing — MODEL 25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET HOUSING WITH LEADS — MODEL 25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET HOUSING WITH LEADS

Technical drawing — MODEL 25 METERING 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET HOUSING WITH LEADS — MODEL 25
METERING 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET HOUSING WITH LEADS

Stainless Steel (Std.) or Brass (Opt.)

Series 20 Operators Conduit

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION — MODEL O25 3-WAY DIRECTIONAL CONTROL CONDUIT CONNECTION

Series 20 Operators Conduit/Bracket Connection

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION — MODEL O25 3-WAY DIRECTIONAL CONTROL CONDUIT/BRACKET CONNECTION

Series 20 Operators DIN

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL — MODEL O25 3-WAY DIRECTIONAL CONTROL DIN STYLE COIL

Series 20 Operators Grommet

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL GROMMET HOUSING WITH LEADS — MODEL O25 3-WAY DIRECTIONAL CONTROL GROMMET HOUSING WITH LEADS

Series 20 Operators Grommet/Bracket Connection

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET HOUSING WITH LEADS — MODEL O25 3-WAY DIRECTIONAL CONTROL GROMMET/BRACKET HOUSING WITH LEADS

Series 20 Operators Yoke Leads

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH YOKE — MODEL O25 3-WAY DIRECTIONAL CONTROL MOLDED COIL WITH YOKE

Series 20 Operators Yoke Spades

Technical drawing — MODEL O25 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS — MODEL O25 3-WAY DIRECTIONAL CONTROL YOKE WITH SPADE TERMINALS

Series 20 Model E25

Read more about Series 20 Model E25

Explosion Proof
The flagship valve initially created for the fluid power industry.
Heavy duty and made of stainless steel.
A real workhorse with proven performance.
It has the greatest amount of options available of all the valves.
Wide range of orifice sizes from 1/32" to 1/8".

Valve specifications — Series 20 Model E25
+ MAX. OPER. PRESS. DIFF.				ORIFICE SIZE		CV FACTOR		NORTH AMERICAN VALVE NUMBER		IECEx/ATEX VALVE NUMBER
AC		DC		N.C.	N.O.	N.C.	N.O.	1/8 NPT PORTS	1/4 NPT PORTS	1/8 NPT PORTS	1/4 NPT PORTS

500		500		1/32	1/32	.024	.024	E25GG7XCCM-∆	E25GG9ZCCM-∆	EA25GG7XCCM-∆	EA25GG9ZCCM-∆
235	(400)	235	(300)	3/64	3/64	.052	.052	E25HH7XCCM-∆	E25HH9ZCCM-∆	EA25HH7XCCM-∆	EA25HH9ZCCM-∆
200	(225)	200	(200)	1/16	3/64	.095	.052	E25JH7XCCM-∆	E25JH9ZCCM-∆	EA25JH7XCCM-∆	EA25JH9ZCCM-∆
150	(225)	150	(200)	1/16	1/16	.095	.095	E25JJ7XCCM-∆	E25JJ9ZCCM-∆	EA25JJ7XCCM-∆	EA25JJ9ZCCM-∆
100	(150)	100	(125)	3/32	3/32	.156	.156	E25KK7XCCM-∆	E25KK9ZCCM-∆	EA25KK7XCCM-∆	EA25KK9ZCCM-∆
100	(125)	100		1/8	3/32	.284	.156	E25NK7XCCM-∆	E25NK9ZCCM-∆	EA25NK7XCCM-∆	EA25NK9ZCCM-∆
35	(40)	35	(40)	1/8	1/8	.284	.227	E25NN7XCCM-∆ ^	E25NN9ZCCM-∆ ^	EA25NN7XCCM-∆ ^	EA25NN9ZCCM-∆ ^

^ VALVES WITH 1/8 ORIFICE ARE NOT UL OR CSA LISTED
+ Ratings in brackets are optional extended ratings; consult factory.

Ordering Information:

Seal Material: Replace ∆ with desired code - Blank = Nitrile (Buna) S = Low Temp Buna. N = FKM* E = Neoprene A = EPDM

When ordering valves or repair packs add voltage and frequency to complete valve number. For example: valve (E25NK9ZCCM 120/60) repair pack (2KE25NK AC)

When ordering operators add the letter “O” to the front of the valve number, replace body port number with the letter “D”: example: operator (OE25NKDZCCM 120/60)

Coil Voltage

12/DC, 24/DC, 48/DC, 125/DC, 120/60-110/50, 240/60, and 24/60.

Nominal Power

AC — 7.3 Watts DC — 9.5 Watts

Coil Construction

Molded Class F with third wire ground (Std.), Class H or Potted (Opt.)

Typical Response Time on Air

4 - 16 Milliseconds

Operating Speed

Up to 600 CPM

Duty Cycle

Continuous

Internal Components

Stainless Steel. Copper – AC Only.

Elastomers

Nitrile (Buna) (Std.). Many other elastomers available.*

Orifice Diameter

See table above.

Porting

1/8" and 1/4" NPT (other ports available).

Housing

Flame-Proof construction with 1/2" NPT conduit

Listings

Valves are UL listed for use in the United States and Canada for Hazardous Locations — Class I, Div 1, Group C and D – Class II, Div 1, Group E, F, and G; Div 2, Groups A, B, C, D, E, F, and G.

Life Expectancy

Millions of cycles, depending on application, lubrication, etc.

Valve Weight

1.50 lbs

Repair Packs

See table above.

Options

Alternate Port Locations, Metering, Manual Override, Alternate Elastomers, Female DIN Style Connector Part Numbers DIN COIL (2 TERMINALS W/GROUND) #20-198 & DIN COIL (3 TERMINALS W/GROUND) #20-19102*

Media

Valve Temperature Range

Standard Valves – 0°F (-18°C) to 104°F (40°C) ambient; 0°F (-18°C) to 150°F (65°C) media. Optional Valves – can tolerate much higher or much lower ambient and media temperatures.*

Maximum Operating Pressure Differentials

See table above.

Burst Pressure

5000 PSI

Leakage

Bubble tight for standard valves.

Vacuum

To 5 Microns*

Flow Chart Series 20-30

Nomenclature Chart (non 58 series)

Series 20 Hazardous Location Valves

Technical drawing — MODEL E25 1/4-18 NPT 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF — MODEL E25
1/4-18 NPT 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF

Technical drawing — MODEL E25 1/8-27 NPT 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF — MODEL E25
1/8-27 NPT 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF

Technical drawing — MODEL E25 MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF — MODEL E25
MANUAL OVERRIDE 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF

Technical drawing — MODEL E25 METERED BODY 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF — MODEL E25
METERED BODY 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF

Stainless Steel (Std.)

Series 20 Operators Explosion Proof

Technical drawing — MODEL OE25 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF — MODEL OE25 3-WAY DIRECTIONAL CONTROL EXPLOSION PROOF

Certification

North American

IECEx/ATEX

IECEx/ATEX Nomenclature

Coming soon.

Subscribe to